HP Color LaserJet Enterprise m553x – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up the HP Color LaserJet Enterprise m553x

Materials Required

  • HP Color LaserJet Enterprise m553x printer
  • Power cord
  • Ethernet or USB cable (depending on the desired connection method)
  • Toner cartridges (cyan, magenta, yellow, black)
  • Paper

Step-by-Step Setup

1. Unbox and Inspect

  • Carefully remove the printer from the box and inspect it for any damage.
  • Remove all protective materials and packaging.

2. Install Toner Cartridges

  • Open the front door of the printer.
  • Remove the used toner cartridges (if any) and discard them properly.
  • Unpack the new toner cartridges and remove their protective caps.
  • Insert each toner cartridge into its corresponding slot until it clicks into place.
  • Close the front door.

3. Load Paper

  • Open the main paper tray.
  • Adjust the paper guides to fit the paper size and orientation you are using.
  • Load paper into the tray and make sure it is flat and secure.
  • Close the paper tray.

4. Connect to Power

  • Plug the power cord into the printer and a power outlet.
  • Turn on the printer using the power button.

5. Connect to Network (Optional)

Ethernet Connection:

  • Plug one end of an Ethernet cable into the Ethernet port on the printer.
  • Plug the other end into an available port on your network router.

USB Connection:

  • Plug one end of a USB cable into the USB port on the printer.
  • Plug the other end into an available USB port on your computer.

6. Configure Network Settings (If Using Ethernet)

  • On the printer’s control panel, navigate to the “Network” menu.
  • Select “Wired Network (Ethernet).”
  • Follow the on-screen prompts to configure the network settings.

7. Install Printer Drivers (If Using USB)

  • Insert the HP installation CD into your computer’s optical drive.
  • Follow the on-screen prompts to install the printer drivers.

Troubleshooting Common Issues

Printer Not Turning On

  • Make sure the power cord is securely connected to the printer and the power outlet.
  • Reset the printer by turning it off, unplugging it, waiting 30 seconds, and then plugging it back in.

Printer Not Printing

  • Check that the toner cartridges are installed correctly and have enough toner.
  • Check that paper is loaded in the main paper tray and is properly aligned.
  • Restart the print job and make sure the printer is selected as the default printer.

Network Connection Issues

  • Check that the Ethernet cable is properly connected to both the printer and the router.
  • Restart the network router and the printer.

Paper Jams

  • Open the paper tray and gently remove any jammed paper.
  • Open the rear output tray and check for any jammed paper.
  • If necessary, call HP customer support for assistance.

Print Quality Issues

  • Check that the toner cartridges are clean and free of debris.
  • Clean the printhead by navigating to the “Maintenance” menu on the printer’s control panel.
  • Adjust the print quality settings in the printer driver.

Additional Tips

  • Register your printer with HP for warranty and support.
  • Install the HP Smart app on your mobile device for easy printing and scanning.
  • Enable the “Power Saver” mode to save energy when the printer is not in use.

Download HP Color LaserJet Enterprise m553x Driver

Ensure your device is fully compatible with the latest drivers for the HP Color LaserJet Enterprise m553x. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver