HP Color LaserJet Enterprise m653x – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up the HP Color LaserJet Enterprise m653x

Unboxing and Preparation

  1. Remove the printer from the box and remove all packaging materials.
  2. Place the printer on a flat, stable surface in a well-ventilated area.
  3. Open the front door and remove the shipping materials inside the printer.

Power and Network Connection

  1. Connect the power cord to the printer and a grounded power outlet.
  2. For wired network: Connect an Ethernet cable from the printer’s Ethernet port to your network.
  3. For wireless network: Press the Wireless button on the printer’s control panel, select your network SSID, and enter the password.

Driver and Software Installation

  1. Download the latest drivers and software for your operating system from HP’s official website.
  2. Run the installation wizard and follow the on-screen instructions.
  3. Select the appropriate printer model and connection type.
  4. Complete the installation process and restart your computer.

Control Panel Setup

  1. Press the OK button on the printer’s control panel.
  2. Use the arrow keys to navigate to the “Administration” menu.
  3. Select “System Setup” and then “Network Setup”.
  4. Configure the printer’s IP address, subnet mask, and default gateway (if required).

Paper Loading

  1. Open the paper tray and adjust the paper guides to the size of the paper you are using.
  2. Load the paper face down in the tray.
  3. Ensure that the paper is flat and not curled.
  4. Close the paper tray.

Troubleshooting Common Issues

Printer Status LED Blinking

  • Amber: Toner is low or empty.
  • Red: Paper jam or no paper.

Printing Problems

  • Blank pages: Ensure that the toner cartridges are full and properly installed.
  • Smeared or faded prints: Clean the toner cartridges and print heads.
  • Misaligned prints: Adjust the paper guides in the paper tray.

Network Issues

  • Cannot connect to the printer: Verify that the printer is connected to the network and check the network settings.
  • Slow printing: Ensure that the network connection is stable and secure.

Paper Handling Problems

  • Paper jams: Clear the jammed paper from the printer’s path.
  • Curled paper: Flatten the paper before loading it into the tray.
  • Paper not feeding: Ensure that the paper tray is properly loaded and not overloaded.

Other Issues

  • Internal error: Power cycle the printer by turning it off and then back on.
  • Firmware update: Check for any available firmware updates and install them if necessary.
  • Contact HP Support: If the issue persists, contact HP Support for assistance.

Additional Tips

  • Use high-quality paper for optimal print quality.
  • Regularly clean the printer’s exterior and print heads to prevent dust buildup.
  • Monitor toner levels and replace cartridges promptly.
  • Install firmware updates to ensure the printer operates at its peak performance.

Download HP Color LaserJet Enterprise m653x Driver

Ensure your device is fully compatible with the latest drivers for the HP Color LaserJet Enterprise m653x. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver