HP Color LaserJet Managed E65160dn – Driver Download, Setup and User Guide

Advertisement

Guide to Setting Up the HP Color LaserJet Managed E65160dn

Unpacking and Assembling

  1. Remove the printer from the box and carefully remove all packaging materials.
  2. Place the printer on a stable, level surface.
  3. Open the front door and remove the packing materials inside.

Installing the Toner Cartridges

  1. Open the front door of the printer.
  2. Remove the empty toner cartridges one at a time.
  3. Replace the new toner cartridges by aligning them with the corresponding color markings and pushing them into place.
  4. Close the front door.

Connecting Cables

  1. Power Cable: Connect one end of the power cable to the printer and the other end to a grounded power outlet.
  2. Network Cable (Optional): If you want to connect the printer to a network, connect an Ethernet cable from the printer’s network port to an available port on your router or switch.

Loading Paper

  1. Open the rear door of the printer.
  2. Adjust the paper guides to fit the width of the paper you are loading.
  3. Load the paper into the tray with the print side down.
  4. Close the rear door.

Configuring the Printer

  1. Turn on the Printer: Press the power button to turn on the printer.
  2. Set the Language: The printer will display a message asking you to select the language. Use the arrow keys to navigate and the OK button to select.
  3. Set the Date and Time: The printer will prompt you to set the date and time. Use the number keys and the OK button to enter the correct information.
  4. Configure the Network (Optional): If you are connecting the printer to a network, follow the on-screen prompts to configure the network settings.

Installing Drivers and Software

  1. Download Drivers: Visit the HP website to download the latest drivers for your printer model.
  2. Install Drivers: Follow the on-screen instructions to install the drivers.
  3. Install Software (Optional): The printer may come with additional software, which you can install if desired.

Troubleshooting Common Issues

Printer Not Printing:
* Check if the printer is connected to power and turned on.
* Make sure the toner cartridges are installed correctly.
* Check if paper is loaded in the tray correctly.
* Ensure the printer is connected to the computer or network.

Print Quality Issues:
* Check if the toner cartridges are near the end of their life and need replacing.
* Clean the printhead by following the instructions in the printer’s user manual.
* Adjust the print quality settings in the printer’s software.

Network Connectivity Issues:
* Check if the network cable is securely connected to both the printer and the network.
* Restart the printer and your router or switch.
* Update the printer’s firmware from the HP website.

Paper Jams:
* Open the jam access door and gently remove the jammed paper.
* If the paper is torn or damaged, remove it completely.
* Reload the paper as described in the paper loading section.

Error Messages:
* If the printer displays an error message, refer to the user manual for the corresponding error code and solution.
* Restart the printer and try again.
* If the problem persists, contact HP customer support.

Download HP Color LaserJet Managed E65160dn Driver

Ensure your device is fully compatible with the latest drivers for the HP Color LaserJet Managed E65160dn. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver