HP Color LaserJet Managed MFP e87660dn – Driver Download, Setup and User Guide

Advertisement

Detailed Guide to Setting Up the HP Color LaserJet Managed MFP e87660dn

Hardware Preparation

  1. Unpack the printer and remove all packaging materials.
  2. Install the toner cartridges by opening the front cover and aligning them with their slots.
  3. Insert the USB cable or Ethernet cable to connect the printer to your computer or network.
  4. Connect the power cord and turn on the printer.

Software Installation

Using the HP Smart App for Mobile Devices:

  1. Download the HP Smart app on your mobile device.
  2. Open the app and select “Add a Printer.”
  3. Follow the on-screen instructions to connect to the printer’s Wi-Fi network.
  4. Once connected, click “Add Printer” and the software installation will begin automatically.

Using the HP Software Suite for Desktops and Laptops:

  1. Insert the installation CD or download the HP Software Suite from HP’s website.
  2. Run the setup wizard and follow the on-screen prompts.
  3. Select the “Recommended” or “Typical” installation option.
  4. Once the installation is complete, click “Finish.”

Printer Configuration

Network Setup (for Wi-Fi or Ethernet):

  1. Open the printer’s embedded web server (EWS) by typing its IP address into a web browser.
  2. Navigate to the Network tab.
  3. Enable Wi-Fi or configure Ethernet settings as needed.

Paper Tray Configuration:

  1. Open the printer’s front cover.
  2. Adjust the paper guides in the input trays to match the paper size and type you are using.
  3. Close the front cover.

Troubleshooting Common Issues

Printer Not Connecting:

  • Check that the USB cable or Ethernet cable is properly connected.
  • Restart the printer and your computer.
  • Make sure your printer’s Wi-Fi network is enabled and has a strong signal.

Paper Jams:

  • Open the printer’s front cover and remove any jammed paper.
  • Adjust the paper guides in the input trays correctly.
  • Avoid using wrinkled or damaged paper.

Print Quality Issues:

  • Check if the toner cartridges are correctly installed and have sufficient toner.
  • Clean the print cartridge contacts.
  • Adjust the print quality settings in the printer properties.

Scanner Not Working:

  • Make sure the scanner lid is closed properly.
  • Clean the scanner window with a soft cloth.
  • Update the HP Scan software to the latest version.

Other Issues:

  • Printer Offline: Check if the printer’s status is set to “Online” in the printer properties.
  • Toner Smearing: Clean the fuser unit inside the printer (consult the printer’s user guide for instructions).
  • Unexpected Shutdowns: Check the printer’s power supply and make sure it is receiving adequate power.

Conclusion

Setting up the HP Color LaserJet Managed MFP e87660dn is a straightforward process that can be completed by following the steps outlined in this guide. Troubleshooting common issues is also covered, helping you to resolve any problems that may arise during the setup or operation of the printer.

Download HP Color LaserJet Managed MFP e87660dn Driver

Ensure your device is fully compatible with the latest drivers for the HP Color LaserJet Managed MFP e87660dn. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver