HP Color LaserJet Managed MFP E87750dn – Driver Download, Setup and User Guide

Advertisement

Setting Up the HP Color LaserJet Managed MFP E87750dn

Step 1: Unpack and Prepare the MFP

  • Carefully remove all packaging materials.
  • Lift the MFP out of the box and place it on a stable, level surface.
  • Remove the protective tape from the control panel and scanner glass.

Step 2: Install Toner Cartridges

  • Open the front door of the MFP.
  • Grip the handle of the empty toner cartridge and slide it out.
  • Unpack the new toner cartridge and remove the protective cover.
  • Align the new toner cartridge with the color label and slide it into the printer until it clicks into place.
  • Repeat for all four toner cartridges.

Step 3: Load Paper

  • Pull out the paper tray at the bottom of the MFP.
  • Fan the edges of the paper stack to separate the sheets.
  • Load the paper stack into the tray with the print side facing up.
  • Adjust the paper guides to fit the paper size.

Step 4: Connect Cables

  • Connect the power cord to the MFP and a power outlet.
  • Connect the Ethernet cable to the MFP and your network router.

Step 5: Install Drivers

  • Insert the HP software CD into your computer.
  • Click on the “Install Printer Software” option.
  • Follow the on-screen instructions to install the printer drivers.

Step 6: Configure the Network

  • Open the Embedded Web Server (EWS) by typing the MFP’s IP address into a web browser.
  • Navigate to the “Networking” tab.
  • Configure the network settings according to your network requirements.

Troubleshooting Common Issues

1. Toner Cartridge Error

  • Verify that the toner cartridge is correctly installed.
  • Clean the contacts on the toner cartridge and the printer.
  • Try using a different toner cartridge.

2. Paper Jam

  • Remove any paper remnants from the paper path.
  • Open and close the front door several times.
  • Gently pull the paper out of the MFP.

3. Network Connectivity Issue

  • Ensure that the Ethernet cable is securely connected to the MFP and your network router.
  • Verify that your network is functioning properly.
  • Reinstall the printer drivers.

4. Print Quality Issue

  • Check the paper type and quality.
  • Clean the printer rollers and fuser.
  • Adjust the print quality settings in the printer driver.

5. Control Panel Error

  • Restart the MFP by turning it off and then back on.
  • Reset the MFP to factory settings.
  • Contact HP support for further assistance.

Download HP Color LaserJet Managed MFP E87750dn Driver

Ensure your device is fully compatible with the latest drivers for the HP Color LaserJet Managed MFP E87750dn. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver