HP Designjet t1120 44-in Postscript Printer – Driver Download, Setup and User Guide

Advertisement

Detailed Guide to Setting Up the HP Designjet T1120 44-in PostScript Printer

Introduction

The HP Designjet T1120 44-in PostScript Printer is a wide-format printer designed for professionals in the architecture, engineering, construction, and graphic design industries. This guide will provide detailed instructions on how to set up your HP Designjet T1120 PostScript Printer, including troubleshooting common issues.

What’s in the Box

  • HP Designjet T1120 Printer
  • Printheads
  • Ink cartridges
  • Printer stand
  • Power cord
  • Network cable (optional)
  • Software CD
  • User manual

Assembly Instructions

1. Install the Printer Stand

  • Unpack the printer stand and place it on a stable, flat surface.
  • Slide the printer onto the stand until it clicks into place.

2. Install the Printheads

  • Open the top cover of the printer.
  • Remove the orange protective caps from the printheads.
  • Align the printheads with the corresponding color cartridges and slide them into the slots until they click into place.

3. Install the Ink Cartridges

  • Open the front door of the printer.
  • Insert the ink cartridges into the corresponding slots until they click into place.
  • Close the front door.

4. Connect the Power Cord

  • Insert the power cord into the printer and a power outlet.

5. Connect the Network Cable (Optional)

  • If you want to connect the printer to a network, insert the network cable into the Ethernet port on the printer and a network switch or router.

Software Installation

1. Insert the Software CD

  • Insert the HP Designjet T1120 software CD into your computer’s CD-ROM drive.

2. Run the Setup Wizard

  • Follow the on-screen instructions to install the printer driver and software.

3. Select the Printer Connection Type

  • When prompted, select the type of connection you are using (e.g., USB, Ethernet).

4. Configure Printer Settings

  • Configure the printer settings, such as paper size, print quality, and orientation.

Troubleshooting Common Issues

1. Printer Not Printing

  • Check that the printer is turned on and connected to a power outlet.
  • Check that the ink cartridges are installed correctly and have ink.
  • Make sure that the paper is correctly loaded in the input tray.
  • Restart the printer.

2. Print Quality Issues

  • Check that the correct paper type is selected in the printer settings.
  • Adjust the print quality settings in the printer driver.
  • Clean the printheads using the built-in cleaning utility.

3. Network Connectivity Issues

  • Check that the network cable is securely connected to the printer and the network.
  • Make sure that the printer is assigned a valid IP address.
  • Try restarting the printer and the network router.

4. Error Messages

  • Refer to the printer’s user manual or the HP website for specific error message codes and troubleshooting instructions.
  • Contact HP support if you are unable to resolve the issue on your own.

Conclusion

By following these instructions carefully, you can successfully set up your HP Designjet T1120 44-in PostScript Printer. If you encounter any issues during setup or operation, refer to the troubleshooting tips provided in this guide. For additional support, visit the HP website or contact HP support.

Download HP Designjet t1120 44-in Postscript Printer Driver

Ensure your device is fully compatible with the latest drivers for the HP Designjet t1120 44-in Postscript Printer. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver