HP Designjet t1200 Postscript – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up the HP Designjet T1200 PostScript Printer

Introduction

The HP Designjet T1200 PostScript printer is a reliable and versatile large-format printer designed for high-quality printing in a variety of environments. This detailed guide will walk you through the step-by-step process of setting up your T1200 printer, addressing common issues that may arise along the way.

Step 1: Unboxing and Initial Setup

  • Unpack the printer and remove all packaging materials.
  • Place the printer on a stable and level surface.
  • Plug in the power cord and turn on the printer.
  • Install the ink cartridges as per the user manual.
  • Load paper into the appropriate tray.

Step 2: Driver Installation

  • Download the latest printer driver from the HP website.
  • Run the downloaded installer and follow the on-screen instructions.
  • Connect the printer to your computer using the included USB cable or wirelessly, if desired.

Step 3: Configuring the Printer

  • Open the “Printers” control panel on your computer.
  • Right-click on the HP Designjet T1200 printer and select “Properties.”
  • Navigate to the “Ports” tab and ensure that the correct port is selected.
  • Under the “Printing Preferences” tab, adjust settings such as paper size, orientation, and print quality.

Step 4: PostScript Setup

  • Select the “Device Options” tab in the printer properties window.
  • Under “PostScript Options,” enable the “PostScript Job Log” and “PostScript Error Log.”
  • Configure additional PostScript settings as needed, such as memory allocation and rasterization options.

Step 5: Test Print and Troubleshooting

  • Print a test page to verify that the printer is working correctly.

  • If you encounter any issues, such as:

    • Blurry prints: Check the print quality settings and ensure that the paper type is selected appropriately.
    • Missing colors: Inspect the ink cartridges and replace any that are empty or damaged.
    • Paper jams: Clear the paper path and ensure that paper is loaded correctly.
    • Communication errors: Verify the printer’s connection to your computer and check for any firewall or software conflicts.

Advanced Settings and Troubleshooting

Resolution and Rasterization

  • The printer offers a resolution range of 300 to 2400 dpi.
  • For high-quality prints, use a higher resolution.
  • Adjust the rasterization settings to optimize image quality and performance.

Memory Allocation

  • The printer has 128 MB of memory.
  • Increase the memory allocation if you experience errors or slow printing.

Color Management

  • The printer supports ICC profiles for accurate color reproduction.
  • Install and use ICC profiles specific to the paper type and ink being used.

Error Logs and Diagnostics

  • The PostScript Job Log and Error Log provide valuable information for troubleshooting issues.
  • Review these logs for errors and identify potential causes.

Conclusion

By following the steps outlined in this guide, you should be able to successfully set up and configure your HP Designjet T1200 PostScript printer. With proper maintenance and troubleshooting, you can enjoy high-quality prints for years to come.

Download HP Designjet t1200 Postscript Driver

Ensure your device is fully compatible with the latest drivers for the HP Designjet t1200 Postscript. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver