HP DesignJet T1700 PostScript – Driver Download, Setup and User Guide

Advertisement

Setting Up the HP DesignJet T1700 PostScript: A Comprehensive Guide

Overview:

The HP DesignJet T1700 PostScript is a high-quality wide-format printer designed for professional graphic artists, architects, engineers, and students. This guide will provide a step-by-step process for setting up the T1700, including troubleshooting common issues.

Step 1: Unboxing and Setup

  • Unpack the printer and remove all packaging materials.
  • Place the printer on a sturdy, level surface.
  • Remove the protective tape from the printhead.
  • Lift the top cover and install the ink cartridges according to the color-coded slots.

Step 2: Paper Loading

  • Open the front paper cover.
  • Adjust the paper guides to match the paper width.
  • Load the paper into the tray.
  • Ensure the paper is flat and free of creases or tears.

Step 3: Driver Installation

  • Insert the HP software CD into your computer.
  • Follow the on-screen prompts to install the driver.
  • Select the “HP DesignJet T1700 PostScript” printer model.
  • Connect the printer to your computer using the provided USB cable.

Step 4: Network Configuration

  • To connect the printer to a network, open the printer’s front panel.
  • Navigate to “Network Settings” > “Wired Network” or “Wireless Network.”
  • Configure the network settings according to your network type.

Step 5: Test Printing

  • Open a document in your preferred design software.
  • Select the “HP DesignJet T1700 PostScript” printer as the output device.
  • Click “Print” or “Plot” to begin printing.

Troubleshooting Common Issues

1. Printer Not Printing:

  • Ensure the printer is powered on and connected to your computer.
  • Check the ink levels and replace any empty cartridges.
  • Verify that the paper is properly loaded.
  • Restart the printer and computer.

2. Print Quality Issues:

  • Clean the printheads using the printer’s maintenance utility.
  • Check the paper type and ensure it is compatible with the printer.
  • Calibrate the printer using the HP Print Quality Toolbox.

3. Network Connectivity Issues:

  • Ensure the network cable is properly connected at both ends.
  • Check the printer’s IP address and verify that it is in the same network range as your computer.
  • Reset the printer’s network settings to default.

4. Paper Jams:

  • Open the front paper cover and gently remove the jammed paper.
  • Check the paper path for any obstructions.
  • Adjust the paper guides to ensure the paper is loaded correctly.

5. Error Messages:

  • Refer to the printer’s user guide for specific error messages and troubleshooting steps.
  • Check the HP website or contact HP support for additional assistance.

Conclusion:

By following these steps and troubleshooting tips, you can successfully set up and use your HP DesignJet T1700 PostScript printer. This high-quality printer will provide you with professional-grade prints for your graphic design, architectural, and engineering projects.

Download HP DesignJet T1700 PostScript Driver

Ensure your device is fully compatible with the latest drivers for the HP DesignJet T1700 PostScript. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver