HP DesignJet T1700dr PostScript – Driver Download, Setup and User Guide

Advertisement

Setting Up the HP DesignJet T1700dr PostScript Printer

Prerequisites

  • HP DesignJet T1700dr PostScript printer
  • Computer with a USB or Ethernet port
  • HP Universal Print Driver (UPD) or PostScript driver
  • Appropriate media and ink cartridges

Unboxing and Setup

  • Carefully unpack the printer and remove all packaging materials.
  • Place the printer on a flat, stable surface in a well-ventilated area.
  • Connect the power cord to the printer and a power outlet.

Driver Installation

Option 1: HP Universal Print Driver (UPD)

  • Download the HP UPD from HP’s website.
  • Run the installation wizard and follow the prompts.
  • Select the “HP DesignJet T1700dr PostScript UPD” printer model.

Option 2: PostScript Driver

  • Download the PostScript driver from HP’s website.
  • Extract the driver files to a folder on your computer.
  • Open the “Printers” or “Devices and Printers” control panel.
  • Click “Add a printer” and follow the instructions.
  • Select the “HP DesignJet T1700dr PostScript” printer model.
  • Click “Add.”

Media Loading

  • Open the front access door of the printer.
  • Pull out the media tray and adjust it to the desired paper size.
  • Load the media into the tray, ensuring it is aligned correctly.
  • Close the media tray and front access door.

Ink Cartridge Installation

  • Open the ink cartridge door on the right side of the printer.
  • Push down on the old ink cartridge and lift it out.
  • Unpack the new ink cartridge and remove the protective tape.
  • Insert the new ink cartridge into the empty slot.
  • Push down until it clicks into place.
  • Repeat for all ink cartridges.

Network Configuration (Optional)

  • If you want to connect the printer to a network, connect an Ethernet cable from the printer to a router or network switch.
  • Open the printer’s web interface by typing the printer’s IP address into a web browser.
  • Click “Networking” and configure the network settings as needed.

Troubleshooting Common Issues

Printer Not Responding

  • Ensure that the power cord is securely connected to the printer and power outlet.
  • Restart the printer by turning it off and on again.
  • Check if the USB or Ethernet cable is properly connected to the computer and printer.

Poor Print Quality

  • Inspect the media for any wrinkles or imperfections.
  • Check the ink levels and replace any empty cartridges.
  • Perform a printhead cleaning from the printer’s control panel or web interface.

Paper Jams

  • Remove any jammed paper from the printer’s input or output tray.
  • Inspect the paper and printer for any obstacles that may be causing the jam.
  • Gently pull out the jammed paper, taking care not to tear it further.

Error Messages

  • Consult the printer’s user manual or HP’s website for specific error messages.
  • Try restarting the printer or updating the printer’s firmware.
  • If the issue persists, contact HP support.

Additional Tips

  • Calibrate the printer regularly to ensure optimal printing results.
  • Use genuine HP media and ink cartridges for best performance.
  • Keep the printer clean by regularly wiping down the exterior and printhead.
  • Monitor the printer’s status and ink levels through the printer’s web interface or HP Smart app.

Download HP DesignJet T1700dr PostScript Driver

Ensure your device is fully compatible with the latest drivers for the HP DesignJet T1700dr PostScript. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver