HP DesignJet T1708dr PostScript – Driver Download, Setup and User Guide

Advertisement

Detailed Guide: Setting Up the HP DesignJet T1708dr PostScript Printer

Setting up the HP DesignJet T1708dr PostScript printer is straightforward with these detailed instructions.

Unpacking and Preparation

  1. Remove the printer from the box and unpack all components.
  2. Place the printer on a stable, level surface.
  3. Connect the power cord to the printer and a power outlet.

Ink Cartridges and Printheads

  1. Open the printer’s top cover.
  2. Remove the empty ink cartridges.
  3. Insert the new ink cartridges into the appropriate slots.
  4. Close the top cover.

Software Installation

  1. Insert the HP DesignJet software CD into your computer’s CD-ROM drive.
  2. Follow the on-screen instructions to install the software.
  3. Select “USB” as the connection type.
  4. Connect the included USB cable between the printer and your computer.

Network Connection (Optional)

If you prefer to connect the printer over a network, follow these steps:

  1. Connect an Ethernet cable between the printer and your network router.
  2. Open the printer’s control panel.
  3. Navigate to Network Setup.
  4. Select Wired Network.
  5. Follow the instructions to configure the network settings.

Paper Loading

  1. Open the printer’s front cover.
  2. Adjust the paper guides to the desired paper size.
  3. Load paper into the input tray.
  4. Close the front cover.

Test Print

  1. Open a document in your preferred software application.
  2. Go to File > Print.
  3. Select the HP DesignJet T1708dr printer.
  4. Click Print.

Troubleshooting Common Issues

  • Printer does not turn on: Check the power cable and make sure it is securely connected.
  • Paper jams: Remove any jammed paper carefully. Adjust the paper guides properly to prevent future jams.
  • Print quality issues: Replace the ink cartridges if they are empty or damaged. Ensure you are using the correct paper type for the print job.
  • Printer not recognized by computer: Unplug and reconnect the USB or Ethernet cable. Update the printer driver through the HP website.
  • Error messages: Refer to the printer’s user guide for specific error message explanations and solutions.

Conclusion

With this comprehensive guide, you can successfully set up your HP DesignJet T1708dr PostScript printer and resolve any common issues that may arise. Enjoy high-quality prints and reliable performance for your design and printing needs.

Download HP DesignJet T1708dr PostScript Driver

Ensure your device is fully compatible with the latest drivers for the HP DesignJet T1708dr PostScript. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver