HP Designjet t3500 36-in Production Emfp – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up the HP Designjet T3500 36-in Production eMFP

Unboxing and Assembly

  1. Unpack the printer carefully and remove all protective packaging.
  2. Locate the two side panels and the top cover. Slide the side panels into place and secure them with screws.
  3. Place the top cover on the printer and latch it into place.

Cartridge Installation

  1. Open the ink cartridge door.
  2. Remove the protective tape from the new ink cartridges.
  3. Insert the ink cartridges into their corresponding color slots.
  4. Close the ink cartridge door.

Paper Loading

  1. Open the paper tray and adjust the guides to the desired paper size.
  2. Insert the paper stack into the tray.
  3. Close the paper tray and press the “Load” button.

Software Installation

  1. Insert the printer driver CD into your computer’s disc drive.
  2. Follow the on-screen instructions to install the printer driver and software.
  3. Select the printer from the list of available devices.

Network Configuration

  1. Power on the printer and connect it to your computer via USB, Ethernet, or wireless network.
  2. Open the printer’s control panel and navigate to the “Network” menu.
  3. Select your preferred network connection type and follow the on-screen instructions to configure it.

Print Quality Troubleshooting

Problem: Faded or washed-out prints

  • Solution: Check the ink levels and replace any empty or low cartridges.
  • Solution: Clean the printheads using the printer’s maintenance utilities.

Problem: Smudged or smeared prints

  • Solution: Ensure that the paper is compatible with the printer.
  • Solution: Check the printer’s print quality settings and adjust them accordingly.

Problem: Lines or banding in prints

  • Solution: Clean the printheads using the printer’s maintenance utilities.
  • Solution: Realign the printer cartridges by following the instructions in the printer’s control panel.

Problem: Paper jams

  • Solution: Gently remove the jammed paper from the printer’s paper path.
  • Solution: Check for any obstructions in the paper tray or printer’s interior.

Other Troubleshooting

Problem: Printer is not responding

  • Solution: Reset the printer by powering it off and on.
  • Solution: Check the printer’s cables and ensure that they are properly connected.

Problem: Printer is not printing

  • Solution: Verify that the printer is turned on and has paper loaded.
  • Solution: Ensure that the print job is not paused or canceled.

Problem: Scanned images are blurry

  • Solution: Clean the scanner’s glass surface.
  • Solution: Adjust the scanner’s resolution settings to a higher quality.

By following these steps, you can successfully set up and troubleshoot the HP Designjet T3500 36-in Production eMFP to ensure optimal performance.

Download HP Designjet t3500 36-in Production Emfp Driver

Ensure your device is fully compatible with the latest drivers for the HP Designjet t3500 36-in Production Emfp. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver