HP Designjet t770 24-in Postscript Printer – Driver Download, Setup and User Guide


Advertisement

Comprehensive Guide to Setting Up the HP Designjet T770 24-in PostScript Printer

Introduction

The HP Designjet T770 24-in PostScript Printer is a high-performance printing solution designed for architectural, engineering, and construction (AEC) professionals. This guide will provide a step-by-step walkthrough of the setup process, as well as troubleshooting tips for common issues.

Step 1: Unpacking and Positioning

  • Carefully unpack the printer and remove all protective materials.
  • Place the printer on a stable and level surface that can support its weight.
  • Ensure there is enough clearance around the printer for access to the rolls, ink cartridges, and maintenance components.

Step 2: Installing the Roll System

  • Open the front cover of the printer.
  • Install the roll holders according to the instructions provided in the user manual.
  • Insert the desired roll(s) onto the holders and secure them in place.

Step 3: Connecting the Power and Network

  • Connect the power cord to the printer and a grounded power outlet.
  • Turn on the printer.
  • Connect the printer to your network using a wired Ethernet cable or wirelessly via Wi-Fi (if supported).

Step 4: Installing the Ink Cartridges

  • Open the top cover of the printer.
  • Remove the orange caps from the ink cartridges.
  • Insert the cartridges in their designated slots until they click into place.

Step 5: Loading the Paper and Selecting the Media Settings

  • Select the roll you wish to print on from the printer’s control panel.
  • Adjust the media width settings to match the roll size.
  • Load the paper into the printer and align it with the guides.

Step 6: Printing a Test Page

  • Print a test page to ensure the printer is functioning properly.
  • If the test page prints correctly, the setup is complete.

Troubleshooting Common Issues

Printing Problems

  • Blank pages: Check ink cartridge levels, carriage alignment, and media settings.
  • Streaks or lines on the print: Clean the printheads, align the cartridges, or replace any faulty cartridges.
  • Wrong colors: Calibrate the printer or check the ICC profiles used in the design software.

Network Issues

  • Printer not connecting to the network: Ensure the network cable is securely connected and the printer is configured with the correct IP address.
  • Slow printing speeds: Optimize network settings, such as enabling network discovery and adjusting bandwidth limits.

Paper Feeding Issues

  • Paper not feeding correctly: Check the roll is loaded properly and the media width settings are correct. Clean the paper path and adjust the tension settings if necessary.
  • Paper jams: Remove the jammed paper carefully and check for any obstructions or damaged rollers.

Other Issues

  • Unusual noises: Check the printer for any loose parts or worn components. Contact HP support for assistance.
  • Error messages: Follow the instructions on the error message or refer to the user manual for troubleshooting steps.
  • Printer not recognized by computer: Ensure the printer is turned on and connected to the same network as the computer. Update your computer’s drivers if necessary.

Download HP Designjet t770 24-in Postscript Printer Driver

Ensure your device is fully compatible with the latest drivers for the HP Designjet t770 24-in Postscript Printer. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver