HP Designjet t790ps 44in – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up the HP Designjet T790ps 44in

Introduction:

The HP Designjet T790ps 44in is a powerful wide-format printer designed for professional CAD, GIS, and engineering applications. This detailed guide will walk you through the entire setup process, ensuring optimal performance and troubleshooting any common issues you may encounter.

Step 1: Unboxing and Assembly

  • Carefully unbox the printer and all components.
  • Remove the protective packaging and foam inserts.
  • Assemble the stand by attaching the legs and leveling feet.
  • Place the printer on the stand and secure it with the provided bolts.

Step 2: Installing Ink Cartridges

  • Locate the ink cartridge bays on the right side of the printer.
  • Open the bays and insert the corresponding ink cartridges into their slots.
  • Ensure the cartridges are firmly seated and the caps are removed.

Step 3: Loading Paper

  • Open the front cover of the printer.
  • Raise the paper feed lever and insert the paper roll.
  • Ensure the paper edge is aligned with the guide mark.
  • Lower the paper feed lever and close the front cover.

Step 4: Connecting the Printer

Power Connection:

  • Connect the power cord to the printer and an AC power outlet.

Data Connection:

  • USB: Connect a USB cable from the printer to your computer.
  • Network: Connect an Ethernet cable from the printer to your network router.
  • Wi-Fi: Enable Wi-Fi on the printer and connect it to your wireless network.

Step 5: Installing Printer Drivers

  • Go to the HP website and download the latest drivers for your operating system.
  • Run the driver installation wizard and follow the prompts.

Step 6: Printer Configuration

  • Open the Printer Control Panel on your computer.
  • Select the HP Designjet T790ps 44in printer.
  • Make the necessary settings for paper size, quality, and color management.

Step 7: Printing a Test Page

  • Send a test print from your software to the printer.
  • Examine the print quality and make any necessary adjustments to the print settings.

Troubleshooting Common Issues

1. Printer Not Recognizing Paper

  • Check that the paper is loaded correctly and aligned with the guide mark.
  • Clean the paper feed sensor located inside the printer.
  • Replace the paper if it is damaged or wrinkled.

2. Poor Print Quality

  • Clean the printheads using the built-in maintenance utility.
  • Check the ink levels and replace any empty cartridges.
  • Adjust the print quality settings in the Printer Control Panel.

3. Printer Not Connecting to Network

  • Ensure that the Ethernet cable is firmly connected to the printer and router.
  • Check the router settings and make sure that the DHCP server is enabled.
  • Restart the printer and router to resolve any network issues.

4. Printer Error Messages

  • Consult the HP User Guide for error code descriptions and solutions.
  • Contact HP Support for assistance if the error cannot be resolved.

Conclusion

By following this detailed guide, you can successfully set up the HP Designjet T790ps 44in and troubleshoot any common issues. This powerful printer will enable you to produce high-quality wide-format prints for your professional applications. Remember to regularly maintain the printer and replace consumables as needed to ensure optimal performance and longevity.

Download HP Designjet t790ps 44in Driver

Ensure your device is fully compatible with the latest drivers for the HP Designjet t790ps 44in. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver