HP DeskJet 3810 Color Inkjet Printer – Driver Download, Setup and User Guide

Advertisement

Guide to Setting Up the HP DeskJet 3810 Color Inkjet Printer

Unboxing and Preparation

  1. Carefully unpack the printer and remove all packaging materials.
  2. Inspect the printer for any damage or missing components.
  3. Place the printer on a flat and stable surface.

Hardware Setup

  1. Install Power Cable: Connect the power cord to the back of the printer and plug it into a wall outlet.
  2. Load Paper: Open the paper tray and slide the paper guides to the correct width of the paper you are using. Load the paper and adjust the guides to hold it securely.

Software Installation

  1. Download Drivers and Software: Visit HP’s support website and download the latest drivers and software for your specific operating system.
  2. Run Setup Wizard: Run the downloaded installation file and follow the on-screen instructions to install the software.
  3. Connect Printer: When prompted, connect the printer to your computer using a USB cable or Wi-Fi.

Wi-Fi Setup

  1. Turn on Wi-Fi: Ensure that the printer’s Wi-Fi is turned on. You can find the Wi-Fi button on the control panel.
  2. Run Wi-Fi Setup Wizard: From the printer’s control panel, navigate to the “Wireless” menu and select “Wi-Fi Setup Wizard.”
  3. Connect to Network: Follow the on-screen instructions to connect the printer to your desired Wi-Fi network.

Installing Ink Cartridges

  1. Open Cartridge Access Door: Lift the printer’s top cover to access the cartridge slots.
  2. Remove Old Cartridges: If any old cartridges are installed, remove them by pressing down on the cartridge and pulling it out.
  3. Insert New Cartridges: Take the new cartridges out of the packaging and remove the protective tape. Insert the color cartridge into the left slot and the black cartridge into the right slot.
  4. Align Cartridges: Close the cartridge access door and wait for the printer to align the cartridges automatically.

Troubleshooting Common Issues

Problem: Printer Not Turning On
– Check that the power cable is securely plugged into both the printer and outlet.
– Try a different power outlet.
– Reset the printer by unplugging it for 60 seconds, then plugging it back in.

Problem: Paper Jam
– Open the printer’s top cover and remove any jammed paper.
– Make sure the paper is loaded correctly and not folded or wrinkled.

Problem: Printer Not Printing
– Check that the printer is connected to the computer or Wi-Fi network.
– Ensure that the ink cartridges are installed and have sufficient ink.
– Clean the printheads by following the instructions in the HP Print and Scan Doctor tool.

Problem: Wi-Fi Connection Issues
– Ensure that the printer and computer are on the same Wi-Fi network.
– Reset the printer’s Wi-Fi connection by pressing and holding the Wi-Fi and power buttons simultaneously for 5 seconds.

Problem: Alignment Issues
– Run the Cartridge Alignment Utility from the printer’s control panel or HP Print and Scan Doctor tool.
– Clean the cartridges and printheads to remove any debris.

Download HP DeskJet 3810 Color Inkjet Printer Driver

Ensure your device is fully compatible with the latest drivers for the HP DeskJet 3810 Color Inkjet Printer. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver