HP DeskJet 990cse Printer – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up the HP DeskJet 990cse Printer

Step 1: Unpacking and Preparation

  • Carefully unbox the printer and remove all packaging materials.
  • Place the printer on a stable, flat surface in a well-ventilated area.
  • Remove the protective tape from the outside of the printer.

Step 2: Installing Ink Cartridges

  • Open the top cover of the printer.
  • Remove the blue protective tape from the ink cartridges.
  • Align the cartridges with the corresponding slots in the cartridge holders.
  • Insert the cartridges firmly until they click into place.

Step 3: Connecting to Power and Computer

  • Connect the power cord to the printer and plug it into an electrical outlet.
  • Use a USB cable (not included) to connect the printer to your computer.

Step 4: Installing Software Drivers

  • Insert the HP software CD into your computer’s CD drive.
  • Follow the on-screen instructions to install the software drivers.
  • If you do not have the CD, you can download the drivers from HP’s website.

Step 5: Printer Alignment

  • Load a few sheets of plain paper into the input tray.
  • Press the “Power” and “Resume” buttons simultaneously for 5 seconds to start the alignment process.
  • Follow the on-screen prompts to complete the alignment.

Troubleshooting Common Issues

Problem: The printer does not print.

  • Check if the power cord is securely connected.
  • Ensure that there is enough paper in the input tray.
  • Make sure that the ink cartridges are properly installed and have sufficient ink.
  • Clean the print nozzles by following the steps outlined in the printer’s user manual.

Problem: The printer won’t connect to my computer.

  • Check the USB cable for any damage.
  • Make sure that the USB cable is securely connected to both the printer and computer.
  • Reinstall the printer drivers following the steps in Section 4.

Problem: The print quality is poor.

  • Clean the print nozzles as mentioned in the previous issue.
  • Check the paper quality and thickness.
  • Adjust the print quality settings in the printer preferences.

Problem: The printer is making loud noises.

  • Check if there is any debris or paper stuck inside the printer.
  • Turn off the printer, wait for a few minutes, and turn it back on.
  • If the noise persists, contact HP support.

Additional Tips

  • Use genuine HP ink cartridges for optimal print quality.
  • Regularly clean and maintain the printer to prevent clogs and ensure smooth operation.
  • Keep the printer in a cool, dry environment to avoid overheating.
  • If you encounter any issues not covered in this guide, refer to the printer’s user manual or contact HP support.

Download HP DeskJet 990cse Printer Driver

Ensure your device is fully compatible with the latest drivers for the HP DeskJet 990cse Printer. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver