HP Envy 5665 E-all-in-one – Driver Download, Setup and User Guide

Advertisement

Guide to Setting Up Your HP Envy 5665 e-All-in-One

Unboxing and Assembly

  1. Carefully unpack the printer from the box and remove all protective materials.
  2. Place the printer on a flat, stable surface.
  3. Remove the tape from the ink cartridge slot and install the cartridges.
  4. Attach the power cord and turn on the printer.

Software Installation

  1. Insert the included software disc into your computer.
  2. Follow the on-screen instructions to install the printer driver and software.
  3. Connect the printer to your computer using a USB cable or Wi-Fi (see below).

Wi-Fi Setup

  1. Ensure your Wi-Fi network is active and your device is connected.
  2. From the printer’s control panel, select “Wireless” and then “Setup Wizard.”
  3. Choose your Wi-Fi network from the list and enter the password.
  4. The printer will establish a connection and obtain an IP address.

Troubleshooting Common Issues

Paper Jam

  1. Gently open the top cover of the printer.
  2. Remove the jammed paper carefully, avoiding tearing it.
  3. If you encounter any resistance, gently pull the paper out from the other side.
  4. Close the top cover and resume printing.

Ink Cartridge Error

  1. Remove and reinsert the ink cartridge(s) that are causing the error.
  2. Ensure the cartridges are properly aligned and clicked into place.
  3. If the error persists, clean or replace the cartridge(s).

Error Messages

Paper Size Mismatch: Ensure the paper loaded in the tray matches the selected paper size in the print settings.

Low on Ink: Replace the low or empty ink cartridge(s) with new ones.

Network Connectivity Issues: Check your Wi-Fi connection and ensure the printer is within range. Reset the router or printer if necessary.

Other Troubleshooting Tips

  • Reset the printer by unplugging it for 30 seconds and then plugging it back in.
  • Check if the printer is connected to a power outlet and the power cord is secure.
  • Ensure the printer is placed on a flat surface and in a well-ventilated area.
  • Update the printer firmware regularly from the HP support website.

Download HP Envy 5665 E-all-in-one Driver

Ensure your device is fully compatible with the latest drivers for the HP Envy 5665 E-all-in-one. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver