HP LaserJet Enterprise MFP M635h – Driver Download, Setup and User Guide
Advertisement
Detailed Guide to Setting Up the HP LaserJet Enterprise MFP M635h
Unboxing and Setup
1. Unpack the Device:
– Carefully remove the MFP from the box.
– Remove all packaging materials and protective covers.
2. Install the Cartridges:
– Open the front cover.
– Remove the protective tape from the toner cartridges.
– Insert the cartridges into the designated slots until they click into place.
– Close the front cover.
3. Load Paper:
– Pull out the paper tray.
– Adjust the paper guides to the appropriate paper size.
– Load paper face up into the tray.
– Push the tray back into the MFP.
4. Connect Power and Network:
– Connect the power cord to the MFP and a grounded outlet.
– Connect the Ethernet cable (optional) to the MFP and your network.
Initial Configuration
5. Power On and Initialize:
– Press the power button to turn on the MFP.
– Wait for the display to initialize.
6. Set Language and Keyboard:
– Select your preferred language and keyboard layout from the display options.
7. Configure Network (if using Ethernet):
– If you’re using Ethernet, the MFP will typically configure its network settings automatically via DHCP.
– If necessary, you can manually configure the network settings using the Embedded Web Server (see below).
8. Install Drivers (optional):
– Visit HP’s website to download and install the appropriate drivers for your operating system.
– Follow the on-screen instructions to complete the driver installation.
Using the Embedded Web Server (EWS)
The EWS provides advanced configuration options for the MFP.
1. Access the EWS:
– Open a web browser and enter the MFP’s IP address in the address bar.
– Press Enter and enter the administrator password (default password: admin).
2. Configure Advanced Settings:
– Navigate through the EWS options to customize settings such as:
– Print and copy settings
– Network and security settings
– Email and scan settings
3. Troubleshooting:
– Refer to the “Troubleshooting” section on the EWS for help resolving any issues encountered.
Troubleshooting Common Issues
1. MFP Not Printing:
– Check if the MFP is turned on and connected to a power source.
– Verify that the toner cartridges are properly installed.
– Ensure that there is paper in the tray.
– Check for any error messages on the display.
2. Cannot Connect to Network:
– Ensure that the Ethernet cable is connected securely.
– Verify that your network is working properly.
– Try restarting the MFP and router.
3. Scan Not Working:
– Make sure the scanner cover is open.
– Check if the scan destination is correctly configured in the EWS.
– Try restarting the MFP and scanning again.
4. Paper Jams:
– Open the front cover and carefully remove any jammed paper.
– Check if any debris or foreign objects are causing the jam.
– Clear any torn or wrinkled paper from the paper tray.
5. Error Codes:
– Look up error codes on the HP support website or in the MFP’s user guide.
– Identify the cause of the error and follow the troubleshooting steps provided.
Download HP LaserJet Enterprise MFP M635h Driver
Ensure your device is fully compatible with the latest drivers for the HP LaserJet Enterprise MFP M635h. Downloading and installing the correct driver software is essential for optimal functionality and performance.