HP LaserJet m1005 Multifunction Printer – Driver Download, Setup and User Guide

Advertisement

How to Set Up Your HP LaserJet m1005 Multifunction Printer

Step 1: Unpack and Install the Printer

  • Remove the printer from the box and remove all packaging materials.
  • Place the printer on a flat, stable surface.
  • Connect the power cord and turn on the printer.

Step 2: Install the Toner Cartridge

  • Open the front cover of the printer.
  • Remove the protective cover from the toner cartridge.
  • Align the toner cartridge with the tracks inside the printer and insert it.
  • Close the front cover.

Step 3: Install the Software

  • Insert the HP LaserJet m1005 software CD into your computer.
  • Follow the on-screen instructions to install the software.
  • If you do not have the CD, you can download the software from the HP Support website.

Step 4: Connect the Printer to Your Computer

USB Connection:

  • Connect the USB cable from the printer to an available USB port on your computer.

Wireless Connection:

  • Access the printer’s Wi-Fi settings through the control panel.
  • Select your wireless network and enter the password.

Step 5: Configure the Printer Settings

  • Open the HP LaserJet m1005 Control Panel software on your computer.
  • Choose the “Basic” tab and select your preferred paper size and type.
  • Adjust any other necessary settings according to your printing needs.

Troubleshooting Common Issues

Printer Not Printing:

  • Ensure that the printer is turned on and connected to your computer.
  • Check if the toner cartridge is installed properly and has sufficient toner.
  • Make sure that the paper tray is loaded with paper.
  • Try restarting the printer.

Print Quality Issues:

  • Clean the toner cartridge using the instructions provided in the printer manual.
  • Check if the paper type and quality match your printer settings.
  • Adjust the print quality settings in the control panel software.

Wireless Connectivity Problems:

  • Ensure that your printer and computer are connected to the same Wi-Fi network.
  • Check if the wireless signal is strong and stable.
  • Reset the printer’s Wi-Fi settings through the control panel.

Scanner Not Working:

  • Make sure that the scanner lid is open.
  • Check if the HP Scan software is installed on your computer.
  • Restart the printer and try again.

For additional support, refer to the following resources:

  • HP LaserJet m1005 User Guide
  • HP Support website
  • Contact HP Customer Support

Download HP LaserJet m1005 Multifunction Printer Driver

Ensure your device is fully compatible with the latest drivers for the HP LaserJet m1005 Multifunction Printer. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver