HP LaserJet m104a – Driver Download, Setup and User Guide

Advertisement

Setting Up the HP LaserJet M104a: A Comprehensive Guide

Unboxing and Preparation

  1. Unpack the printer: Carefully remove the printer from its packaging and place it on a stable and level surface.
  2. Remove the protective materials: Take out the toner cartridge and plastic wrapping. Remove any tape or protective stickers.
  3. Connect the power cable: Insert one end of the power cable into the printer and the other end into a power outlet.
  4. Connect the USB cable: If you plan to connect the printer to a computer, insert one end of the USB cable into the printer and the other end into the computer’s USB port.

Toner Cartridge Installation

  1. Open the toner cartridge access door: Press the button on the front of the printer to open the toner cartridge door.
  2. Remove the old cartridge (if applicable): If there’s an old cartridge installed, grasp its handle and pull it straight up to remove it.
  3. Unpack the new cartridge: Carefully remove the new cartridge from its packaging and shake it gently to distribute the toner.
  4. Insert the new cartridge: Hold the cartridge by its handle and align it with the toner cartridge slot. Push it straight down until it clicks into place.
  5. Close the toner cartridge door: Press the door back into place until it latches.

Paper Tray Loading

  1. Open the paper tray: Pull the paper tray out from the bottom of the printer.
  2. Adjust the paper guides: Slide the paper guides to match the width of the paper you want to use.
  3. Load the paper: Place the stack of paper in the paper tray, making sure it’s aligned correctly and not overfilled.
  4. Close the paper tray: Push the paper tray back into the printer until it snaps into place.

Software Installation

  1. Insert the CD/DVD: If the printer came with a CD/DVD, insert it into your computer’s CD/DVD drive.
  2. Run the installer: Follow the on-screen instructions to install the printer drivers and software.
  3. Select your printer model: If prompted, choose the “HP LaserJet M104a” model from the list of available printers.
  4. Complete the installation: Follow the remaining prompts to complete the software installation.

Troubleshooting Common Issues

Printer Not Printing

  • Ensure that the printer is turned on and connected to the computer.
  • Check the USB cable and make sure it’s securely connected at both ends.
  • Check the paper level and reload paper if necessary.
  • Restart the printer and computer.

Toner Cartridge Issues

  • If you receive a “Replace Toner” message, replace the toner cartridge with a new one.
  • If the toner cartridge is smudging or causing streaks, clean the toner cartridge contacts or replace it.

Paper Jams

  • Open the printer’s top cover and carefully remove any jammed paper.
  • Make sure the paper is correctly loaded and aligned in the paper tray.
  • Adjust the paper guides to match the paper size.

Ink Smearing

  • Replace the toner cartridge with a new one.
  • Clean the printhead by running a cleaning cycle through the printer’s software.

Wi-Fi Connectivity Problems

  • Ensure that the printer and computer are connected to the same Wi-Fi network.
  • Check the Wi-Fi password and make sure it’s correct.
  • Update the printer’s firmware if available.

Download HP LaserJet m104a Driver

Ensure your device is fully compatible with the latest drivers for the HP LaserJet m104a. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver