HP LaserJet m1120 Multifunction Printer – Driver Download, Setup and User Guide

Advertisement

Setting Up the HP LaserJet m1120 Multifunction Printer: A Comprehensive Guide

Unboxing and Setup

  1. Unpack the printer: Remove the printer from the box and all packaging materials.
  2. Insert the toner cartridge: Open the front door of the printer and pull out the toner cartridge tray. Insert the toner cartridge into the tray and push it in until it clicks into place.
  3. Load paper: Open the top cover of the printer and pull out the paper tray. Load the paper into the tray with the printable side facing up. Adjust the paper guides to match the paper size.
  4. Connect the power cord: Plug the power cord into the back of the printer and then into a power outlet.

Software Installation

  1. Download the software: Visit the HP website and download the latest software for your operating system.
  2. Install the software: Run the downloaded software and follow the on-screen prompts to complete the installation.
  3. Connect the printer to your computer: Once the software is installed, connect the printer to your computer using a USB cable or over a network.

Printer Configuration

  1. Open the Control Panel: Go to the Start menu in Windows or System Preferences in macOS. Search for “Control Panel” or “Printers” and open it.
  2. Add the printer: Click on “Add a printer” or “Add a new printer” and follow the on-screen instructions to add the HP LaserJet m1120.
  3. Set as default printer: If necessary, set the HP LaserJet m1120 as your default printer for printing documents.

Troubleshooting Common Issues

Printer Not Printing

  • Check the power connection: Ensure that the printer is properly connected to a power outlet and that the power cord is not damaged.
  • Check the USB cable: If using a USB connection, inspect the cable for any damage and try a different one if possible.
  • Restart the printer: Turn off the printer, wait a few seconds, and then turn it back on.
  • Clear the print queue: Go to the Control Panel, select “Printers,” and right-click on the HP LaserJet m1120. Click on “Open Print Queue” and then on “Cancel All Documents.”

Toner Problems

  • Low toner: Check the toner level indicator on the printer’s control panel. If the toner is low, replace it with a new cartridge.
  • Streaky or faded prints: The toner cartridge may be defective. Try replacing it with a new one.
  • Blank pages: The toner cartridge may not be properly installed. Remove the cartridge and reinstall it.

Paper Jams

  • Remove the paper jam: Open the paper tray and carefully remove any jammed paper.
  • Check for obstructions: Ensure that nothing is blocking the paper path inside the printer.
  • Realign the paper: Reload the paper into the tray and adjust the paper guides to ensure it is feeding correctly.

Network Issues

  • Check network connectivity: Verify that your computer and printer are connected to the same network.
  • Restart the router: Unplug the router, wait a few minutes, and then plug it back in.
  • Reinstall the printer driver: Remove the printer from the Control Panel and reinstall the driver from the HP website.

Download HP LaserJet m1120 Multifunction Printer Driver

Ensure your device is fully compatible with the latest drivers for the HP LaserJet m1120 Multifunction Printer. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver