HP LaserJet M112w – Driver Download, Setup and User Guide


Advertisement

A Comprehensive Guide to Setting Up the HP LaserJet M112w

Unboxing and Setup Instructions

1. Unpack the Printer:
– Carefully remove the printer and components from the box.
– Unwrap the printer and remove all protective materials.

2. Install the Toner Cartridge:
– Open the front cover of the printer.
– Shake the toner cartridge gently.
– Remove the orange tape from the cartridge.
– Align the cartridge with the tracks and insert it until it clicks into place.

3. Load the Paper Tray:
– Open the paper tray and fan the edges of the paper.
– Insert the paper into the tray and adjust the paper guides to match the paper size.
– Close the paper tray.

4. Connect the Power Cord:
– Connect the power cord to the back of the printer and to a power outlet.
– Turn on the printer using the power button.

5. Install Drivers:
– Insert the HP software CD into your computer’s CD drive.
– If the CD does not start automatically, navigate to the CD drive and run the setup file.
– Follow the on-screen instructions to install the drivers.

6. Connect to Wi-Fi (Optional):
– On the printer control panel, press the “Wireless” button.
– Select “Wi-Fi Setup Wizard.”
– Choose your Wi-Fi network from the list and enter your password.
– Press “OK” to connect to the network.

Troubleshooting Common Issues

1. Printer Not Printing:
– Ensure the printer is turned on and connected to power.
– Check if there is paper in the tray.
– Make sure the toner cartridge is installed properly.
– Verify that the USB cable (if connected) is securely attached.
– Restart the printer by turning it off and back on.

2. Cannot Connect to Wi-Fi:
– Verify that the Wi-Fi network is active and within range of the printer.
– Ensure that the printer is connected to the same Wi-Fi network as your computer.
– Reset the printer’s Wi-Fi settings by pressing the “Wireless” button for 5 seconds.
– Check the firewall settings on your computer to ensure they do not block the printer.

3. Toner Smudging:
– Remove the toner cartridge and wipe the contacts with a clean, dry cloth.
– Reinstall the toner cartridge and make sure it is seated firmly.
– Adjust the print quality settings on the printer control panel.
– Replace the toner cartridge if smudging persists.

4. Paper Jams:
– Open the front cover of the printer and gently remove any jammed paper.
– Check the paper tray for any debris or obstructions.
– Straighten the paper and try printing again.
– If the paper jam persists, contact HP support.

Additional Tips

  • Use Original HP Toner Cartridges: HP toner cartridges are designed to work optimally with LaserJet printers, providing high-quality prints and preventing printer issues.
  • Set Up Automatic Updates: Enable automatic updates on the printer to ensure you have the latest drivers and firmware, improving performance.
  • Clean the Printer Regularly: Use a dry cloth or compressed air to remove dust and debris from the printer’s exterior and interior surfaces, ensuring optimal printing quality.
  • Conserve Toner: Use the “Toner Save” mode in the print settings to reduce toner consumption without compromising print quality.
  • Contact HP Support: If you encounter any persistent issues with your HP LaserJet M112w, do not hesitate to contact HP support for assistance.

Download HP LaserJet M112w Driver

Ensure your device is fully compatible with the latest drivers for the HP LaserJet M112w. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver