HP LaserJet M112we – Driver Download, Setup and User Guide

Advertisement

Step-by-Step Guide to Setting Up the HP LaserJet M112we

Unboxing and Setup

  1. Unpack the printer and remove all packaging materials.
  2. Remove the protective tape and install the toner cartridge.
  3. Connect the power cord to the printer and a power outlet.
  4. Turn on the printer using the power button.

Network Configuration

Wi-Fi:

  1. On the printer’s control panel, navigate to “Network” > “Wireless.”
  2. Select your Wi-Fi network from the list and enter the password.
  3. Wait for the printer to connect to the network.

Ethernet:

  1. Connect an Ethernet cable from the printer’s Ethernet port to your router.
  2. The printer should automatically obtain an IP address.

Software Installation

  1. Go to the HP website and download the latest software for the HP LaserJet M112we.
  2. Run the installation wizard and follow the on-screen instructions.
  3. Select the printer from the list of available devices and click “Connect.”

Troubleshooting Common Issues

Printer Not Connecting to Wi-Fi:

  • Verify that the Wi-Fi network password is correct.
  • Reset the printer’s network settings by pressing and holding the “Wireless” button on the control panel for 10 seconds.
  • Ensure that the printer is within range of the Wi-Fi router.

Paper Jams:

  • Open the printer’s front cover and remove any jammed paper.
  • Gently pull the paper out along the paper path.
  • Check for any obstructions or tears in the paper before reloading.

Toner Cartridge Issues:

  • Check if the toner cartridge is properly installed.
  • Shake the toner cartridge vigorously from side to side.
  • If the toner is low or empty, replace it with a new one.

Printing Quality Issues:

  • Clean the print head by following the instructions in the printer’s user manual.
  • Check for any smudges or streaks on the paper.
  • Try using a different type of paper.

Other Issues:

  • If the printer displays an error message, refer to the printer’s user manual for specific instructions.
  • Reset the printer to factory defaults by holding down the “Resume” button on the control panel for 10 seconds.
  • Contact HP customer support for further assistance if the issue persists.

Download HP LaserJet M112we Driver

Ensure your device is fully compatible with the latest drivers for the HP LaserJet M112we. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver