HP LaserJet Managed Flow MFP e72535z – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up the HP LaserJet Managed Flow MFP e72535z

Unboxing and Assembly

  1. Unpack: Carefully remove the printer from the box and unwrap all protective materials.
  2. Remove packing tape: Remove all packing tape securing the toner cartridges and other components.
  3. Install toner cartridges: Open the front door and insert the four toner cartridges into their designated slots. Close the door securely.
  4. Install optional accessories: If desired, install any optional accessories such as a stapler, hole puncher, or document feeder.

Network Configuration

  1. Connect the network cable: Connect one end of an Ethernet cable to the Ethernet port on the printer and the other end to your network.
  2. Test network connection: Print a configuration report to verify that the network connection is active.
  3. Configure wireless connection (optional): If desired, configure the printer for wireless connectivity by following the instructions in the user manual.

IP Address Assignment

  1. Obtain IP address: If you are using a DHCP server, the printer will automatically obtain an IP address. If not, you need to assign a static IP address.
  2. Set static IP address (optional): Navigate to the printer’s web interface and specify a static IP address, subnet mask, default gateway, and DNS servers.

Software Installation

  1. Download software: Download the HP LaserJet Managed Flow MFP e72535z software from HP’s website.
  2. Run the installer: Run the downloaded installer and follow the on-screen instructions.
  3. Connect the printer: Select the printer from the list of available devices and click “Connect.”

Troubleshooting Common Issues

Printing Issue:

  • Printer not printing: Check if the printer is powered on, online, and connected to the network.
  • Paper jams: Remove any jammed paper and try printing again.
  • Incorrect print settings: Verify the print settings and ensure they are correct for the paper size and type.

Network Issue:

  • No network connection: Ensure the network cable is securely connected and the printer’s IP address is configured correctly.
  • Firewall problems: Check if the firewall is blocking communication with the printer.
  • Slow network performance: Optimize network performance by connecting the printer to a faster port or using a wireless extender.

Software Issue:

  • Software installation failed: Verify that the software is compatible with your operating system and reinstall if necessary.
  • Printer not recognized: Uninstall and reinstall the software, ensuring that the printer is properly connected and powered on.
  • Printing delays: Close unnecessary applications and restart the print spooler service to improve printing speed.

Other Issues:

  • Toner low or empty: Replace the empty toner cartridge with a new one.
  • Fuser error: Contact HP support for assistance as fuser issues require technical repair.
  • Unusual noises: Check for any loose parts or debris that may be causing the noise.

Download HP LaserJet Managed Flow MFP e72535z Driver

Ensure your device is fully compatible with the latest drivers for the HP LaserJet Managed Flow MFP e72535z. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver