HP LaserJet Managed MFP E73130dn – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up the HP LaserJet Managed MFP E73130dn

Step 1: Unpacking and Setting Up

  1. Carefully remove the printer from its packaging and place it on a stable surface.
  2. Connect the power cord to the printer and a power outlet.
  3. Remove all protective films and tape from the printer.
  4. Open the front cover and remove the toner cartridge from its packaging.
  5. Align the toner cartridge with the tracks inside the printer and insert it until it clicks into place.
  6. Close the front cover.

Step 2: Connecting to a Network

  1. Connect an Ethernet cable from the printer’s Ethernet port to your network.
  2. Ensure that your network is DHCP-enabled so that the printer can automatically obtain an IP address.
  3. If DHCP is not enabled, you can manually configure the printer’s IP address using the printer’s control panel.

Step 3: Installing the Software

  1. Insert the HP Support disc into your computer’s optical drive.
  2. Follow the on-screen instructions to install the printer software.
  3. During the installation, select the “Network Printer” option and follow the wizard to find your printer on the network.
  4. Complete the software installation and restart your computer.

Step 4: Printing a Test Page

  1. Access the printer’s control panel by touching the “Home” button.
  2. Navigate to “Admin” > “Reports” > “Configuration/Status Pages.”
  3. Select “Configuration Page” and press “OK” to print a test page.

Step 5: Troubleshooting Common Issues

Unable to Connect to the Network

  • Verify that the Ethernet cable is securely connected to the printer and your network.
  • Ensure that your network is functioning properly.
  • Reset the printer’s network settings by navigating to “Admin” > “Network” > “Network Settings” > “Restore Network Defaults.”

Paper Jams

  • Open the front cover and gently pull out the jammed paper.
  • If the paper is stuck in the rear of the printer, open the rear access door and remove the paper.
  • Adjust the paper guides in the paper tray to ensure that they are properly aligned.

Print Quality Issues

  • Clean the toner cartridge by navigating to “Admin” > “Maintenance” > “Supplies” > “Clean Toner Cartridge.”
  • Check if the toner cartridges have sufficient toner and replace them if necessary.
  • Ensure that the correct paper type is selected in the software settings.

Other Issues

  • If the printer displays an error message, refer to the user manual for troubleshooting instructions.
  • Reset the printer to factory defaults by navigating to “Admin” > “Factory Reset” > “Restore Factory Defaults.”
  • Contact HP support if the issue persists.

Additional Tips

  • Use genuine HP toner cartridges for optimal print quality and reliability.
  • Set up automatic firmware updates to ensure the printer has the latest features and security patches.
  • Consider using HP’s remote management tools for easy printer monitoring and troubleshooting.
  • Regularly clean the printer’s exterior to prevent dust buildup.

Download HP LaserJet Managed MFP E73130dn Driver

Ensure your device is fully compatible with the latest drivers for the HP LaserJet Managed MFP E73130dn. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver