HP LaserJet MFP M235dwe – Driver Download, Setup and User Guide

Advertisement

A Detailed Guide to Setting Up the HP LaserJet MFP M235dwe

Step 1: Unbox and Install the Printer

  • Remove the printer from the box and all packaging materials.
  • Place the printer on a flat, stable surface.
  • Open the front cover and remove any packing material or foam inserts.

Step 2: Install the Toner Cartridge

  • Open the toner cartridge packaging.
  • Remove the toner cartridge and gently shake it back and forth to distribute the toner evenly.
  • Align the toner cartridge with the guides inside the printer and gently push it into place.

Step 3: Load Paper

  • Open the paper tray located at the bottom of the printer.
  • Adjust the paper guides to the width of the paper you are using.
  • Load a stack of paper into the tray, making sure it is below the maximum fill line.

Step 4: Connect the Power Cable

  • Plug the power cable into the back of the printer and into a power outlet.
  • Turn on the printer using the power button on the control panel.

Step 5: Connect to the Network (Optional)

  • Wired Connection: Connect an Ethernet cable from the printer’s Ethernet port to your router or switch.
  • Wireless Connection:
    • Go to the control panel and navigate to Network > Wireless.
    • Select your Wi-Fi network and enter the password.
    • The printer will connect to the network and display the status as “Connected.”

Step 6: Install Software and Drivers

  • Go to the HP website and download the latest software and drivers for the HP LaserJet MFP M235dwe.
  • Run the installation wizard and follow the on-screen instructions.

Troubleshooting Common Issues

Printer Not Powering On

  • Check if the power cable is securely connected to the printer and power outlet.
  • Try using a different power outlet.
  • Reset the printer by unplugging it, waiting 30 seconds, and plugging it back in.

Printer Not Printing

  • Check if the toner cartridge is properly installed.
  • Verify that the paper is loaded correctly and the paper tray is not empty.
  • Check the printer’s control panel for any error messages or status indicators.
  • Restart the printer by turning it off and on.

Printer Not Connecting to Wi-Fi

  • Make sure that the printer is within range of the Wi-Fi router.
  • Double-check the Wi-Fi password and ensure it is correct.
  • Reset the printer’s Wi-Fi settings by going to Network > Restore Network Defaults.

Printer Scanning Not Working

  • Check if the scanner lid is properly closed.
  • Verify that the scanning software (e.g., HP Smart app) is installed and open.
  • Restart the scanning software and try scanning again.

Other Tips

  • Use original HP toner cartridges for optimal printing quality.
  • Clean the printer regularly to prevent paper jams and other issues.
  • Refer to the user manual for additional troubleshooting steps and detailed instructions.

Download HP LaserJet MFP M235dwe Driver

Ensure your device is fully compatible with the latest drivers for the HP LaserJet MFP M235dwe. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver