HP LaserJet MFP M236sdn – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up the HP LaserJet MFP M236sdn

Introduction

The HP LaserJet MFP M236sdn is a versatile multifunction printer designed for small businesses and home offices. This guide will provide step-by-step instructions on setting up your device, including troubleshooting common issues.

Step 1: Unboxing and Preparation

  • Remove the printer from the packaging and place it on a stable surface.
  • Remove all protective materials and tapes from the device.
  • Unfold the output bin and paper tray.
  • Remove the toner cartridge from its packaging and insert it into the printer.

Step 2: Power Connection and Wireless Setup

  • Plug the power cord into the printer and a power outlet.
  • Turn on the printer using the power button.

  • Connect the printer to your wireless network using the following methods:

    • Wi-Fi Protected Setup (WPS): Press the WPS button on both the printer and your wireless router.
    • HP Smart App: Download the HP Smart app on your mobile device and follow the instructions to connect the printer.

Step 3: Paper Loading and Software Installation

  • Open the paper tray and load paper with the print side facing up.
  • Adjust the paper guides to fit the paper size.
  • Insert the software CD into your computer or download the HP Smart app.
  • Follow the on-screen instructions to install the printer software.

Step 4: Scanning and Copying Setup

  • Place the document to be scanned on the flatbed scanner or in the automatic document feeder (ADF).
  • Open the HP Smart app or use the printer’s control panel to initiate a scan or copy.
  • Configure the scan or copy settings as desired.

Troubleshooting Common Issues

Issue: Printer not responding

  • Restart the printer by turning it off and then on again.
  • Check the power cord and connections.
  • Reset the printer to factory settings by holding down the “Cancel” button for 10 seconds.

Issue: Printing blank pages

  • Ensure the toner cartridge is properly installed and has sufficient toner.
  • Check the paper tray for any jammed paper.
  • Reset the printer by turning it off and then on again.

Issue: Scanned documents not saving

  • Make sure the HP Smart app or scanning software is updated.
  • Check the file permissions and available storage space on your computer.
  • Restart the printer and computer.

Issue: Wi-Fi connection not working

  • Ensure the printer is within range of your wireless router.
  • Check the Wi-Fi password and reconnect the printer to the network.
  • Reset the printer’s Wi-Fi settings by holding down the “Wi-Fi” button for 5 seconds.

Issue: ADF not feeding paper

  • Check for any jammed paper in the ADF.
  • Ensure the ADF tray is properly inserted and the paper guides are correctly positioned.
  • Clean the ADF rollers using a soft cloth.

Conclusion

Following these steps, you should be able to set up and use your HP LaserJet MFP M236sdn successfully. If you encounter any issues, refer to the troubleshooting tips provided. For additional support, you can contact HP Customer Service or visit their website for further assistance.

Download HP LaserJet MFP M236sdn Driver

Ensure your device is fully compatible with the latest drivers for the HP LaserJet MFP M236sdn. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver