HP LaserJet Pro 4002d – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up the HP LaserJet Pro 4002d and Troubleshooting

Unboxing and Setup

  1. Unpack the contents: Remove the printer, toner cartridge, power cord, and user guide from the box.
  2. Remove the packaging materials: Open the front cover and pull out the orange packaging material. Remove the tape from the toner cartridge.
  3. Insert the toner cartridge: Align the toner cartridge with the tracks inside the printer and push it in until it clicks into place.
  4. Close the front cover: Push down on the front cover until it snaps shut.
  5. Connect the power cord: Plug one end of the power cord into the printer and the other into a power outlet.
  6. Turn on the printer: Press the power button on the front panel to turn on the printer.
  7. Wait for initialization: The printer will go through a brief initialization process.

Network Setup

  1. Open the Printer Control Panel: Press the Home button on the printer’s front panel.
  2. Select ‘Network Setup’: Use the arrow keys to navigate to ‘Network Setup’ and press ‘OK’.
  3. Choose ‘Wireless Setup Wizard’: If you want to connect wirelessly, select ‘Wireless Setup Wizard’ and press ‘OK’.
  4. Follow the on-screen instructions: The printer will guide you through configuring your wireless network connection.
  5. Wired Connection: If you prefer a wired connection, connect an Ethernet cable from your router to the Ethernet port on the printer. The printer will automatically obtain an IP address.

Software Installation

  1. Download the driver: Visit HP’s website and download the latest software driver for the HP LaserJet Pro 4002d.
  2. Run the installer: Once the download is complete, run the installer and follow the on-screen instructions.
  3. Connect the printer to your computer: Connect the printer to your computer using a USB cable or the network connection you have configured.
  4. Add the printer: In the printer setup wizard, select your printer and click ‘Add’.
  5. Complete the installation: Follow any remaining prompts to complete the software installation.

Troubleshooting Common Issues

1. Printer not printing
– Check if the printer is turned on and connected to power.
– Make sure the toner cartridge is properly installed.
– Reset the printer by turning it off, waiting 30 seconds, and then turning it back on.

2. Wireless connection issues
– Ensure that the wireless network is functioning properly.
– Check if the printer is within range of the wireless router.
– Reset the wireless network settings on the printer and reconfigure the connection.

3. Paper jams
– Open the front cover and carefully remove any jammed paper.
– Check the paper tray for any debris or misaligned paper.
– Reset the printer by turning it off and back on.

4. Print quality issues
– Replace the toner cartridge if it is low or empty.
– Clean the print cartridge by following the instructions in the user guide.
– Adjust the print quality settings in the printer driver.

5. Scanner not working
– Check if the scanning software is installed and running on your computer.
– Make sure the computer is connected to the printer via USB or network.
– Open the HP Scan software and verify that the printer is selected as the scanner device.

Additional Resources

Download HP LaserJet Pro 4002d Driver

Ensure your device is fully compatible with the latest drivers for the HP LaserJet Pro 4002d. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver