HP LaserJet Pro MFP m130a – Driver Download, Setup and User Guide

Advertisement

Detailed Guide to Setting Up the HP LaserJet Pro MFP m130a

Unpacking and Setup

  1. Remove the printer from the box and remove all packaging materials.
  2. Place the printer on a flat, stable surface.
  3. Connect the power cord to the printer and a power outlet.
  4. Turn on the printer by pressing the power button.

Installing Toner Cartridge

  1. Open the front cover of the printer.
  2. Remove the imaging drum unit from the printer.
  3. Remove the toner cartridge from the imaging drum unit.
  4. Insert the new toner cartridge into the imaging drum unit.
  5. Insert the imaging drum unit back into the printer.
  6. Close the front cover.

Connecting to a Computer

Via USB:

  1. Connect a USB cable to the printer and your computer.
  2. The printer will be automatically detected by your computer.

Via Wireless (Optional):

  1. Ensure your computer is connected to the same wireless network as the printer.
  2. On the printer, press the wireless button and hold for 3 seconds.
  3. On your computer, open the “Control Panel” and select “Network and Internet”.
  4. Click on “Network and Sharing Center” and then “Change adapter settings”.
  5. Right-click on the wireless network adapter and select “Properties”.
  6. Click on the “Sharing” tab and enable “Allow other network users to connect through this computer’s internet connection”.
  7. Click “OK” and then “Close”.
  8. On the printer, select the “Wireless” menu and then “Wi-Fi Setup Wizard”.
  9. Follow the on-screen instructions to complete the wireless setup.

Installing Printer Software

  1. Insert the provided HP software CD-ROM into your computer.
  2. Follow the on-screen instructions to install the printer software.
  3. During installation, you will be asked to select a connection type. Choose USB or wireless connection.

Troubleshooting Common Issues

Printer Not Detected:

  • Ensure the printer is turned on and connected to power.
  • Check the USB cable (if using USB) or make sure the printer is connected to the same wireless network as your computer.
  • Restart both the printer and your computer.

Paper Feed Issues:

  • Check the paper tray for any debris or jammed paper.
  • Make sure the paper is loaded correctly, with the print side facing down.
  • Adjust the paper guides to fit the paper size.

Print Quality Issues:

  • Check the toner levels and replace if low.
  • Clean the imaging drum unit by following the instructions in the printer manual.
  • Try using a different paper type or quality.

Wireless Connectivity Issues:

  • Ensure your computer and the printer are connected to the same wireless network.
  • Restart the printer and your wireless router or modem.
  • Check the signal strength of your wireless network.

Download HP LaserJet Pro MFP m130a Driver

Ensure your device is fully compatible with the latest drivers for the HP LaserJet Pro MFP m130a. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver