HP LaserJet Pro MFP m132nw – Driver Download, Setup and User Guide

Advertisement

Setting Up the HP LaserJet Pro MFP m132nw

Unboxing and Assembly

  1. Unpack the printer and remove all packaging materials.
  2. Place the printer securely on a flat surface.
  3. Open the front panel and remove the orange transport tape.
  4. Insert the toner cartridge into the slot at the bottom of the printer.
  5. Load plain paper into the paper tray.

Connecting to Wi-Fi

Method 1: WPS

  1. Press the Wi-Fi button on the printer for 3 seconds.
  2. Press the WPS button on your router within 2 minutes.
  3. The printer will automatically connect to the Wi-Fi network.

Method 2: Manual

  1. On the printer’s control panel, press the “Setup” button.
  2. Select “Wi-Fi Settings” > “Wi-Fi Protected Setup”.
  3. Select “Manual”.
  4. Press the “Start” button.
  5. Select the Wi-Fi network from the list and enter the password.
  6. Press the “Start” button again to connect.

Installing the Software

  1. Visit the official HP website (123.hp.com) and download the latest drivers for the HP LaserJet Pro MFP m132nw.
  2. Run the downloaded file and follow the on-screen instructions to install the software.
  3. Connect the printer to your computer using a USB cable (recommended) or Wi-Fi.
  4. Select the “Wireless” or “USB” option during the setup process.

Troubleshooting Common Issues

1. Printer Not Printing

  • Make sure the toner cartridge is properly installed.
  • Check if the printer is turned on and connected to the power outlet.
  • Ensure that the paper tray is loaded with paper.
  • Restart the printer and the computer.

2. Wireless Connection Problems

  • Ensure that the printer and the router are within close proximity.
  • Check if the Wi-Fi network password is correct.
  • Reset the printer’s Wi-Fi settings and re-establish the connection.

3. Print Quality Issues

  • Check if the toner cartridge has enough ink.
  • Clean the printhead by following the instructions in the user manual.
  • Adjust the print quality settings on the printer’s control panel or through the software.

4. Paper Jams

  • Open the front panel and remove the jammed paper.
  • Close the front panel and restart the printing process.
  • If the paper jam persists, contact HP support.

5. Error Messages

  • “Install Toner”: Replace the toner cartridge with a new one.
  • “Paper Out”: Load paper into the paper tray.
  • “Toner Low”: Prepare a new toner cartridge for replacement.
  • “Door Open”: Ensure that the front panel is completely closed.
  • “Printer Offline”: Check the printer’s status and reconnect it.

Download HP LaserJet Pro MFP m132nw Driver

Ensure your device is fully compatible with the latest drivers for the HP LaserJet Pro MFP m132nw. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver