HP LaserJet Pro MFP m132snw – Driver Download, Setup and User Guide

Advertisement

Detailed Guide to Setting Up the HP LaserJet Pro MFP m132snw

Materials Required:

  • HP LaserJet Pro MFP m132snw printer
  • Toner cartridge
  • Network cable (optional)
  • Wi-Fi network (optional)

Step 1: Unpack and Assemble the Printer

  • Remove the printer from the box and place it on a flat, stable surface.
  • Open the scanner lid and remove the protective materials.
  • Install the toner cartridge by aligning it with the tracks inside the printer and pressing it into place.

Step 2: Connect the Printer

You can connect the printer via a USB cable or a network cable (Ethernet).

  • USB Connection: Connect the printer to your computer using the included USB cable.
  • Network Connection: Connect the printer to your router or switch using a network cable. Make sure your network is active and configured.

Step 3: Install the Drivers and Software

  • Insert the HP installation disc into your computer.
  • Follow the on-screen instructions to install the printer drivers and software.
  • If you do not have the installation disc, download the drivers and software from HP’s website.

Step 4: Configure Wi-Fi (Optional)

If you want to use Wi-Fi, follow these steps:

  • Make sure the printer is connected to your network.
  • Open the printer’s control panel and select “Network Configuration.”
  • Choose “Wi-Fi Protected Setup (WPS)” and follow the on-screen instructions to connect the printer to your network.

Step 5: Load Paper

  • Open the paper tray.
  • Adjust the paper guides to fit the size and type of paper you are using.
  • Load paper into the tray and close it.

Step 6: Print a Test Page

  • From your computer, open a document and select “Print.”
  • Choose the HP LaserJet Pro MFP m132snw printer and click “Print.”
  • The printer should print a test page.

Troubleshooting Common Issues:

  • Printer not detected: Ensure that the printer is powered on and correctly connected to your computer or network.
  • Print quality is poor: Check the toner cartridge and replace it if necessary. Clean the print cartridge or fuser.
  • Paper jams: Open the printer and clear any jammed paper. Adjust the paper guides properly and reload the paper.
  • Wi-Fi connectivity issues: Ensure that your Wi-Fi network is active and configured correctly. Reset the printer’s Wi-Fi settings and reconnect it.
  • Scanner not working: Make sure the scanner lid is properly closed. Check for any obstructions in the scanner path.

Additional Tips:

  • Use genuine HP toner cartridges to ensure optimal print quality.
  • Clean the printer regularly to maintain its performance.
  • Update the printer’s firmware for the latest features and bug fixes.
  • Refer to the user manual for detailed instructions and troubleshooting guidance.

Download HP LaserJet Pro MFP m132snw Driver

Ensure your device is fully compatible with the latest drivers for the HP LaserJet Pro MFP m132snw. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver