HP LaserJet Pro MFP m134fn – Driver Download, Setup and User Guide

Advertisement

Detailed Guide to Setting Up the HP LaserJet Pro MFP m134fn

Required Materials

  • HP LaserJet Pro MFP m134fn printer
  • Power cord
  • USB cable (if connecting via USB)
  • Ethernet cable (if connecting via Ethernet)
  • Paper

Step 1: Unpacking and Setup

  1. Remove the printer from the box and discard the packaging materials.
  2. Remove the protective tape and foam from the printer.
  3. Place the printer on a flat, stable surface in a well-ventilated area.
  4. Connect the power cord to the printer and a power outlet.

Step 2: Paper Installation

  1. Open the front cover of the printer.
  2. Adjust the paper guides to the desired paper size.
  3. Load the paper in the paper tray.
  4. Close the front cover.

Step 3: Toner Cartridge Installation

  1. Open the front cover of the printer.
  2. Remove the protective bag from the toner cartridge.
  3. Gently rock the toner cartridge from side to side to distribute the toner.
  4. Insert the toner cartridge into the printer.
  5. Close the front cover.

Step 4: Software Installation (Windows)

  1. Insert the HP Software CD into your computer’s CD/DVD drive.
  2. Follow the on-screen instructions to install the software.
  3. Connect the printer to your computer via USB or Ethernet.
  4. When prompted, select the appropriate connection method and follow the setup wizard to complete the installation.

Step 5: Software Installation (Mac)

  1. Download the HP printer software from the HP website.
  2. Open the downloaded file and follow the on-screen instructions to install the software.
  3. Connect the printer to your Mac via USB or Ethernet.
  4. When prompted, select the appropriate connection method and follow the setup wizard to complete the installation.

Troubleshooting Common Issues

Printing Issues:

  • No printing: Check if the printer is turned on, connected to a power outlet, and the paper tray is loaded.
  • Blank pages: Make sure the toner cartridge is properly installed and not empty.
  • Jammed paper: Open the front cover and remove the jammed paper carefully.

Connection Issues:

  • Printer not detected: Check if the USB cable or Ethernet cable is securely connected to both the printer and your computer.
  • Firewall or antivirus blocking printing: Allow the HP printer software through your security settings.

Other Issues:

  • Loud operating noise: The printer may be in cleaning mode. Let it complete its cycle.
  • Print quality issues: Clean the printhead using the printer’s built-in cleaning feature.
  • Firmware update error: Disconnect the printer from the power outlet for 60 seconds and then reconnect it. Try updating the firmware again.

Additional Tips:

  • Keep the printer’s firmware up to date for optimal performance and security.
  • Use genuine HP toner cartridges to ensure print quality and reliability.
  • Perform regular cleaning and maintenance to extend the printer’s life.
  • Refer to the printer’s user guide for any specific troubleshooting or advanced settings.

Download HP LaserJet Pro MFP m134fn Driver

Ensure your device is fully compatible with the latest drivers for the HP LaserJet Pro MFP m134fn. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver