HP LaserJet Pro MFP m26a – Driver Download, Setup and User Guide

Advertisement

Setting Up the HP LaserJet Pro MFP m26a

Unboxing and Installing

Materials needed:

  • HP LaserJet Pro MFP m26a printer
  • Power cord
  • USB cable (optional)
  • Toner cartridge
  • Paper

Steps:

  1. Remove the printer from the box and unpack its contents.
  2. Open the top cover of the printer.
  3. Remove the orange protective material from the toner cartridge.
  4. Insert the toner cartridge into the printer.
  5. Close the top cover.
  6. Connect the power cord to the printer and a power outlet.
  7. Turn on the printer by pressing the power button.

Software Installation

  1. Visit HP’s support website for your specific model and download the latest driver software.
  2. Run the downloaded file and follow the on-screen instructions.
  3. When prompted, connect the printer to your computer using a USB cable (recommended for the first-time setup).
  4. Follow the prompts to complete the software installation.

Network Setup (Optional)

Via Wi-Fi:

  1. On the printer’s control panel, navigate to the Wireless menu.
  2. Select “Wi-Fi Setup Wizard” and follow the on-screen prompts to connect to your wireless network.

Via Ethernet:

  1. Connect an Ethernet cable to the printer and your router.
  2. On the printer’s control panel, navigate to the Network menu.
  3. Select “Ethernet Configuration” and ensure that “Automatic IP” is selected.

Troubleshooting Common Issues

Printer Not Turning On:

  • Ensure that the power cord is securely connected to the printer and power outlet.
  • Check that the power outlet is working by plugging in another device.
  • Reset the printer by unplugging it, waiting 30 seconds, and plugging it back in.

Printer Not Printing:

  • Check if the printer is out of paper or toner.
  • Ensure that the paper tray is properly inserted.
  • Clear any paper jams by opening the rear of the printer and removing any stuck paper.
  • Reinstall the toner cartridge if it’s not installed correctly.

Paper Jams:

  • Remove the paper tray and gently pull out any jammed paper.
  • Open the rear of the printer and carefully remove any remaining paper fragments.
  • Reinsert the paper tray and try printing again.

Network Connectivity Issues:

  • Ensure that the printer is connected to the same network as your computer.
  • Check the router’s firewall settings to make sure that the printer is not blocked.
  • Power cycle the router and printer to reset the network connection.

Low Toner Alert:

  • Order a new toner cartridge and replace the existing one when the toner level is low.
  • Shake the new toner cartridge gently to distribute the toner powder.
  • Insert the new toner cartridge into the printer.

Download HP LaserJet Pro MFP m26a Driver

Ensure your device is fully compatible with the latest drivers for the HP LaserJet Pro MFP m26a. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver