HP LaserJet Pro MFP m26nw – Driver Download, Setup and User Guide

Advertisement

Setting Up the HP LaserJet Pro MFP m26nw

Unboxing and Preparing

  1. Remove the printer from the box and any protective packaging.
  2. Remove the toner cartridge from the box and shake it gently to distribute the toner.
  3. Remove the orange protective tape from the toner cartridge and slide it into the printer.
  4. Close the front door of the printer.

Connecting to Power and Network

  1. Plug the power cable into the printer and a power outlet.
  2. Connect the Ethernet cable to the printer and your network router (if using wired connection).
  3. Alternatively, you can connect wirelessly:
    • Press the wireless button on the printer’s control panel.
    • Select your Wi-Fi network from the list and enter the password.
    • Wait for the printer to connect.

Installing Software

  1. Visit the HP website to download the latest software drivers for your operating system.
  2. Run the downloaded installer and follow the on-screen instructions.
  3. Select “Network” as the connection type and enter the printer’s IP address (found on the printer’s control panel).
  4. Complete the installation wizard.

Troubleshooting Common Issues

Printer not connecting to Wi-Fi:

  • Verify that the printer is within range of your router and that the Wi-Fi password is correct.
  • Reset the network settings on the printer by pressing and holding the power and wireless buttons simultaneously for 5 seconds.
  • Power cycle your router by unplugging it and plugging it back in.

Toner cartridge issues:

  • Check that the toner cartridge is properly installed.
  • Replace the toner cartridge if it is low or empty.
  • Clean the toner cartridge by shaking it gently and removing any debris.

Printing quality issues:

  • Check the paper tray and make sure it is loaded with the correct type of paper.
  • Adjust the print quality settings in the printer driver.
  • Clean the print cartridge and the printer’s rollers by following the instructions in the user manual.

Scanner not working:

  • Make sure the scanner glass is clean.
  • Check that the computer is connected to the printer and the scanner software is installed.
  • Update the scanner drivers if necessary.

Other issues:

  • If the printer is not responding, power cycle it by unplugging it and plugging it back in.
  • Reset the printer by pressing and holding the power button for 15 seconds.
  • Contact HP customer support for further assistance if needed.

Download HP LaserJet Pro MFP m26nw Driver

Ensure your device is fully compatible with the latest drivers for the HP LaserJet Pro MFP m26nw. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver