HP LaserJet Pro P1106 plus – Driver Download, Setup and User Guide

Advertisement

Detailed Guide to Setting Up the HP LaserJet Pro P1106 Plus

Unboxing and Setup

  1. Unbox the printer and accessories: Remove the printer, toner cartridge, power cord, USB cable (if needed), and setup guide.
  2. Install the toner cartridge: Open the printer’s front cover and remove the orange protective cap from the toner cartridge. Slide the cartridge into the slot until it clicks into place.
  3. Connect the power cord: Insert one end of the power cord into the printer and the other end into a power outlet.
  4. Connect to your computer (optional): If you want to connect the printer to your computer via USB, insert one end of the USB cable into the printer and the other end into your computer’s USB port.
  5. Power on the printer: Press the power button to turn on the printer.

Software Installation

  1. Insert the software CD: If you have the HP software CD, insert it into your computer’s CD drive. The installation wizard will automatically launch.
  2. Follow the on-screen instructions: Select your language, accept the license agreement, and choose the recommended installation options.
  3. Connect the printer (optional): If you are not connecting the printer via USB, select “Wireless” or “Network” as the connection type and follow the prompts to establish the connection.

Troubleshooting Common Issues

Power Issues

  • Printer not turning on: Ensure that the power cord is securely connected to both the printer and the power outlet.
  • Printer turning off unexpectedly: Check the power cord for damage or loose connections.
  • Error message “Print Arm Open”: Open the printer’s front cover and ensure that the print arm is fully closed.

Paper Handling Issues

  • Paper jams: Gently remove the jammed paper from the paper tray or output tray.
  • Paper not feeding properly: Make sure that the paper size and type match the printer’s specifications.
  • Error message “Out of Paper”: Load new paper into the input tray and press the “Continue” button.

Print Quality Issues

  • Faint or faded prints: Replace the toner cartridge.
  • Streaked or blurry prints: Clean the printer’s fuser unit or image drum.
  • Lines or smudges on prints: Check for debris or damage on the image drum.

Network Issues (Wireless/Ethernet)

  • Printer not detected on the network: Check the printer’s network settings and ensure that it is connected to the same network as your computer.
  • Slow or intermittent printing: Optimize your wireless signal by moving the router or printer closer to each other or by reducing wireless interference.
  • Error message “Network Connection Error”: Reset the printer’s network settings and reconnect it to the network.

Other Issues

  • Error message “Service Error”: Contact HP support for assistance.
  • Printer not responding: Reset the printer by unplugging it for 30 seconds and then plugging it back in.
  • Drivers not installed: Reinstall the printer drivers from the HP website.

Additional Tips

  • Use genuine HP toner cartridges for optimal print quality.
  • Clean the printer regularly to prevent paper jams and maintain print quality.
  • Keep the printer in a well-ventilated area to prevent overheating.
  • If you encounter unresolved issues, contact HP support for further assistance.

Download HP LaserJet Pro P1106 plus Driver

Ensure your device is fully compatible with the latest drivers for the HP LaserJet Pro P1106 plus. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver