HP LaserJet Professional m1136 Multifunction Printer – Driver Download, Setup and User Guide

Advertisement

Setting Up the HP LaserJet Professional m1136 Multifunction Printer: A Detailed Guide

Step 1: Unpack the Printer and Components

  • Carefully remove the printer from the box and place it on a flat surface.
  • Open the toner access door and remove the orange protective cap from the toner cartridge.
  • Insert the toner cartridge into the printer and close the toner access door.
  • Remove the protective film from the display panel and power button.

Step 2: Connect the Cables

  • Connect the power cord to the printer and a nearby power outlet.
  • If you are using a USB cable to connect to your computer, connect it to the USB port on the back of the printer and a USB port on your computer.
  • If you are connecting the printer to a network, connect an Ethernet cable to the Ethernet port on the back of the printer and to your router or switch.

Step 3: Install the Software

  • Insert the provided CD-ROM into your computer’s optical drive.
  • Follow the on-screen instructions to install the HP LaserJet Professional m1136 printer software.
  • Select the recommended driver and software options.

Step 4: Configure Network Settings (Optional)

  • If you are using a network connection, you will need to configure the printer’s network settings.
  • Open the printer’s embedded web server by typing its IP address into a web browser (you can find the IP address on the printer’s network configuration page).
  • Enter the administrator password (the default password is “admin”).
  • Navigate to the “Network” tab and configure the printer’s network settings (e.g., IP address, subnet mask, default gateway).

Troubleshooting Common Issues

Problem: Printer is not turning on.

Solutions:
– Check if the power cord is properly connected.
– Ensure that the power outlet is working.
– Try using a different power outlet.

Problem: Printer is not printing.

Solutions:
– Check if there is paper in the input tray.
– Make sure that the toner cartridge is properly installed.
– Check if the print job is stuck in the print queue. Cancel any pending print jobs and restart the printer.
– Update the printer driver.

Problem: Printer is printing blank pages.

Solutions:
– Replace the toner cartridge.
– Clean the print rollers and fuser assembly.
– Reset the printer to factory defaults.

Problem: Printer is not connecting to the network.

Solutions:
– Check if the Ethernet cable is properly connected.
– Make sure that the network is working.
– Reconfigure the printer’s network settings.
– Contact your network administrator for assistance.

Problem: Error message on the display panel.

Solutions:
– Refer to the printer’s user manual for the specific error message and recommended troubleshooting steps.
– Contact HP customer support for further assistance.

Additional Tips:

  • Use high-quality paper for optimal print results.
  • Clean the printer regularly to prevent paper jams and other issues.
  • Keep the printer firmware up to date for the latest features and performance improvements.
  • Order replacement toner cartridges before the current one runs out to avoid interruptions in printing.

Download HP LaserJet Professional m1136 Multifunction Printer Driver

Ensure your device is fully compatible with the latest drivers for the HP LaserJet Professional m1136 Multifunction Printer. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver