HP LaserJet Tank MFP 2602sdn – Driver Download, Setup and User Guide
Advertisement
HP LaserJet Tank MFP 2602sdn Setup Guide
Step-by-Step Instructions
1. Unboxing and Installation
– Carefully unpack the printer and remove all packaging materials.
– Place the printer on a stable and level surface.
– Remove the protective tapes and foams.
2. Power Connection
– Connect the power cord to the printer and a surge-protected outlet.
– Turn on the printer.
3. Network Setup
– Press the “Menu” button on the printer’s control panel.
– Select “Network Configuration” > “Wireless Settings” > “Wireless Setup Wizard”.
– Follow the on-screen prompts to connect the printer to your wireless network.
4. Toner Loading
– Open the toner compartment by pressing the blue lever.
– Remove the toner cartridge and discard the protective wrap.
– Insert the toner cartridge into the compartment until it clicks into place.
– Close the toner compartment.
5. Paper Loading
– Open the paper tray by pulling it out.
– Fan the paper and adjust the paper guides to fit the paper size.
– Load the paper into the tray and push it in.
– Close the paper tray.
6. Software Installation
– Insert the installation CD into your computer.
– Follow the on-screen instructions to install the printer software.
– Connect the printer to the computer using a USB cable (optional).
7. Control Panel Setup
– Customize printer settings through the control panel.
– Set the date, time, and language.
– Configure duplex printing, toner saving mode, and other options.
Troubleshooting Common Issues
1. Printer Not Recognized
– Check power connections and ensure the printer is turned on.
– Try a different USB cable.
– Restart the printer and computer.
2. No Wireless Connection
– Ensure your network is functioning properly.
– Check the wireless password and firewall settings.
– Reset the wireless settings on the printer by pressing the “Wireless” button for 5 seconds.
3. Toner Not Loading
– Ensure the toner cartridge is removed and inserted correctly.
– Check for any packaging material or obstructions in the toner compartment.
– Restart the printer.
4. Paper Jam
– Open the toner compartment and remove jammed paper.
– Open the paper tray and remove jammed paper.
– Gently shake the printer to dislodge any loose paper.
5. Print Quality Issues
– Replace the toner cartridge if it is running low.
– Clean the print head by following the instructions in the user manual.
– Calibrate the printer by printing a test page from the control panel.
6. Scans Not Sending
– Ensure the scanner is enabled in the printer software.
– Check the computer and printer firewall settings to ensure they are not blocking communication.
– Restart the scanner service on the computer.
7. Other Issues
– Consult the user manual or HP support website for additional troubleshooting tips.
– Contact HP support if the issue persists.
Download HP LaserJet Tank MFP 2602sdn Driver
Ensure your device is fully compatible with the latest drivers for the HP LaserJet Tank MFP 2602sdn. Downloading and installing the correct driver software is essential for optimal functionality and performance.