HP Neverstop Laser MFP 1201n – Driver Download, Setup and User Guide

Advertisement

Detailed Guide to Setting Up the HP Neverstop Laser MFP 1201n

Unboxing and Setup

  1. Unbox the printer: Remove all contents from the box, including the printer, toner tank, drum, power cord, and setup guide.
  2. Install the toner tank: Open the printer’s front cover, remove the protective cap from the toner tank, and insert it until it clicks into place.
  3. Install the drum: Open the printer’s top cover, remove the orange protective cover from the drum, and insert it until it locks.
  4. Load paper: Open the paper tray, adjust the paper guides to the appropriate size, and load the paper. Ensure the paper is flat and facing the correct way.
  5. Connect the power cord: Plug the power cord into the printer and a power outlet.
  6. Power on the printer: Press the power button on the printer.

Software Installation

  1. Download the HP Smart App: Visit the HP website or app store to download and install the HP Smart App on your computer or mobile device.
  2. Connect the printer to your network: For wireless setup, select the Wi-Fi icon on the printer’s control panel and follow the on-screen instructions. For wired setup, connect the printer to your router using an Ethernet cable.
  3. Run the HP Smart App: Open the HP Smart App and select “Add a Printer.” Follow the on-screen instructions to connect the printer to your device.

Troubleshooting Common Issues

Power Issues

  • Power light blinking: Check if the power cord is properly connected to the printer and the power outlet.
  • Power light off: Verify that the power outlet is working and try a different power cord.

Paper Feed Issues

  • Paper jams: Carefully remove any jammed paper, making sure to remove all pieces. Adjust the paper guides to the correct size and reload the paper.
  • Paper not feeding: Ensure the paper tray is fully inserted and that the paper is flat and facing the correct way.

Printer Offline

  • Printer not detected by the computer: Check if the printer is connected to the same network as your computer. Restart the printer and your computer.
  • Wireless connection issues: Ensure that your router is working and that the printer is within range. Check the Wi-Fi settings on the printer and make sure they match your network settings.

Print Quality Issues

  • Streaks or smudges: Clean the printer’s fuser by following the instructions in the user manual.
  • Light or faded prints: Check the toner level and replace the toner tank if necessary.
  • Incorrect color: Make sure the printer is set to the correct color mode and that the appropriate toner cartridge is installed.

Additional Tips

  • Use HP-branded toner tanks for optimal performance.
  • Keep the printer in a well-ventilated area to prevent overheating.
  • Perform regular printer maintenance, such as cleaning the fuser and checking for firmware updates.
  • Contact HP support if you encounter any issues that cannot be resolved using the troubleshooting tips provided.

Download HP Neverstop Laser MFP 1201n Driver

Ensure your device is fully compatible with the latest drivers for the HP Neverstop Laser MFP 1201n. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver