HP OfficeJet 9130 All-in-one Printer – Driver Download, Setup and User Guide

Advertisement

Detailed Guide to Setting Up the HP OfficeJet 9130 All-in-One Printer

Step 1: Unpack and Connect the Printer

  • Carefully unpack the printer and remove all packaging materials.
  • Locate the power cord and connect it to the printer and a nearby power outlet.
  • Turn on the printer.

Step 2: Install the Ink Cartridges

  • Open the printer’s front cover.
  • Remove the protective tape from the ink cartridges.
  • Insert the black ink cartridge into the left slot and the color ink cartridge into the right slot.
  • Push the cartridges firmly into place until they snap.

Step 3: Load Paper and Set Paper Size

  • Pull out the paper tray and slide the paper guides outward.
  • Load plain letter-sized paper (or other supported paper types) into the tray.
  • Adjust the paper guides to fit the paper snugly.
  • Select the appropriate paper size and type from the printer’s control panel.

Step 4: Connect to a Network (Optional)

  • Wi-Fi:
    • From the printer’s control panel, select “Wireless,” then “Wi-Fi Protected Setup.”
    • Follow the on-screen instructions to connect to your Wi-Fi network.
  • Ethernet:
    • Connect an Ethernet cable from the router to the printer’s Ethernet port.
    • The printer should automatically detect the network connection.

Step 5: Install Software and Drivers

  • Insert the HP software CD into your computer.
  • If the CD does not start automatically, browse to the CD’s root directory and double-click “setup.exe.”
  • Follow the on-screen instructions to complete the software and driver installation.

Troubleshooting Common Issues

Issue: The printer does not turn on.

  • Ensure that the power cord is securely connected to the printer and the power outlet.
  • Check if the power outlet is working by plugging in another device.
  • Reset the printer by unplugging it for 30 seconds and then plugging it back in.

Issue: No ink cartridges are detected.

  • Open the printer’s front cover and check if the ink cartridges are properly inserted.
  • If the cartridges are inserted correctly, remove them and reinsert them firmly.
  • Contact HP support if the issue persists.

Issue: The printer does not print.

  • Check if the paper tray has paper loaded.
  • Ensure that the printer is connected to the computer or network (if applicable).
  • Restart the printer and the computer.
  • Check the print queue on the computer to see if there are any errors.

Issue: The printer prints with streaks or smudges.

  • Clean the print head by using the printer’s built-in cleaning tool.
  • Replace the ink cartridges if they are low or empty.
  • Align the print cartridges by following the instructions on the printer’s control panel.

Issue: The printer does not scan.

  • Ensure that the scanner lid is closed properly.
  • Check if the HP Scan software is installed on the computer.
  • Restart the computer and the printer, then try scanning again.
  • Update the HP Scan software or drivers if necessary.

Download HP OfficeJet 9130 All-in-one Printer Driver

Ensure your device is fully compatible with the latest drivers for the HP OfficeJet 9130 All-in-one Printer. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver