HP OfficeJet j4680c All-in-one Printer – Driver Download, Setup and User Guide


Advertisement

Setting Up Your HP OfficeJet j4680c All-in-One Printer

Unboxing and Initial Setup

  1. Unpack the printer: Remove the printer from the box and discard all packaging materials.
  2. Install the ink cartridges: Open the ink cartridge door and insert each cartridge into its designated slot. Ensure they snap into place.
  3. Insert the power cord: Connect the power cord to the printer and a nearby power outlet.
  4. Turn on the printer: Press the power button on the front panel.

Wireless Setup

  1. Connect to your network: Press the “Wireless” button on the printer and select your desired network from the list.
  2. Enter the password: Use the numeric keypad to enter your network password and press “OK.”
  3. Wait for setup: The printer will connect to your network. This may take a few minutes.

Software Installation

  1. Download the software: Visit HP’s website and download the latest printer software for your operating system.
  2. Run the installer: Open the downloaded file and follow the on-screen prompts to install the software.
  3. Connect the printer: During the software installation, select your connected printer or enter its IP address if prompted.

Troubleshooting Common Issues

Printer Doesn’t Turn On

  • Ensure that the printer is plugged into a power outlet and that the power cord is not damaged.
  • Try resetting the printer by disconnecting the power cord and waiting for 30 seconds before reconnecting it.

Paper Jams

  • Gently pull out any jammed paper from the input or output tray.
  • If the paper is torn, remove all pieces to prevent further jams.
  • Adjust the paper size and type settings in the printer driver or on the printer control panel.

Poor Print Quality

  • Clean the print cartridges by following the instructions in the printer manual.
  • Use genuine HP ink cartridges to ensure optimal performance.
  • Check the paper type and adjust the print settings accordingly.

Network Connectivity Issues

  • Verify that the printer is within range of your wireless network.
  • Reset the router and printer to re-establish the connection.
  • Update the printer firmware to the latest version for improved stability.

Error Messages

  • Consult the printer manual for specific error codes and their solutions.
  • Restart the printer and make sure all cartridges are properly installed.
  • Check the HP Support website for additional troubleshooting resources.

Additional Tips

  • Use high-quality paper for the best print results.
  • Clean the printer regularly to maintain optimal performance.
  • Consider using HP Instant Ink for convenient and cost-effective ink delivery.
  • Explore the printer’s advanced features, such as scanning, copying, and faxing.

Download HP OfficeJet j4680c All-in-one Printer Driver

Ensure your device is fully compatible with the latest drivers for the HP OfficeJet j4680c All-in-one Printer. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver