HP OfficeJet Pro 8660 E-all-in-one Printer – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up and Troubleshooting the HP OfficeJet Pro 8660 E-All-in-One Printer

Unboxing and Setup

  1. Remove packaging: Carefully unpack the printer and remove all protective materials.
  2. Install cartridges: Open the cartridge access door and insert the ink cartridges into their designated slots.
  3. Connect power: Plug the power cord into the printer and a nearby outlet.
  4. Turn on printer: Press the Power button on the printer.

Wireless Setup

  1. Select Wi-Fi network: From the printer’s touchscreen, navigate to “Network” > “Wireless Setup.” Select your Wi-Fi network and enter the password.
  2. Connect to Wi-Fi: The printer will connect to the network and display a message indicating successful connection.

Ethernet Setup

  1. Connect Ethernet cable: Plug one end of the Ethernet cable into the Ethernet port on the printer and the other end into a router or switch.
  2. Configure IP address: The printer will automatically obtain an IP address from the network. If manual configuration is required, navigate to “Network” > “Protocol.”

Software Installation

  1. Download software: Visit the HP website and download the latest software drivers for your operating system.
  2. Run installation wizard: Run the downloaded installer and follow the on-screen instructions to install the software.
  3. Connect to printer: The software will search for and detect the printer. Select your printer and follow the prompts to establish a connection.

Troubleshooting Common Issues

Paper Jam

  1. Open access door: Lift the top cover of the printer to access the paper jam area.
  2. Remove jammed paper: Carefully pull the jammed paper out of the path.
  3. Close access door: Once the paper is removed, close the top cover securely.

Print Quality Issues

  1. Clean printheads: From the printer’s touchscreen, navigate to “Maintenance” > “Clean Cartridges.”
  2. Check ink levels: The printer will display the ink levels. Replace any empty or low ink cartridges.
  3. Align cartridges: Navigate to “Maintenance” > “Align Cartridges” and follow the prompts to align the cartridges.

Connectivity Problems

  1. Check Wi-Fi connection: Ensure the printer is connected to the same Wi-Fi network as your computer.
  2. Restart printer: Turn off the printer and unplug the power cord. Wait for 30 seconds and plug it back in.
  3. Reset network settings: Navigate to “Network” > “Reset Network Settings” to restore default network configuration.

Other Issues

  1. Scanner not working: Ensure the document feeder is properly closed and the glass surface is clean.
  2. Fax not sending: Verify that you have a valid fax number and that the fax service is enabled.
  3. Printer not responding: Restart the printer by turning it off and on again. If the problem persists, contact HP support.

Additional Tips

  • Use original HP ink cartridges for optimal print quality and reliability.
  • Keep the printer firmware up to date to resolve software issues.
  • Perform regular maintenance tasks such as cleaning the printheads and aligning the cartridges.
  • Consult the user manual for more detailed instructions and troubleshooting steps.

Download HP OfficeJet Pro 8660 E-all-in-one Printer Driver

Ensure your device is fully compatible with the latest drivers for the HP OfficeJet Pro 8660 E-all-in-one Printer. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver