HP OfficeJet Pro l7681 All-in-one Printer – Driver Download, Setup and User Guide

Advertisement

Setting Up the HP OfficeJet Pro 7681 All-in-One Printer

Materials:

  • HP OfficeJet Pro 7681 printer
  • Power cord
  • USB cable (optional)
  • Paper
  • Ink cartridges (included)

Step 1: Unbox the Printer

  • Remove all packaging materials, including the plastic wrap and styrofoam.
  • Remove the top and bottom packing pieces inside the printer.

Step 2: Install the Ink Cartridges

  • Open the cartridge access door and remove any orange protective tape.
  • Unpack the ink cartridges and remove the plastic protectors.
  • Insert the cartridges into their designated slots, matching the color labels.

Step 3: Connect the Power

  • Plug the power cord into the back of the printer.
  • Connect the other end to a grounded power outlet.

Step 4: Connect to Your Computer (Optional)

USB Connection:

  • Connect one end of the USB cable to the printer.
  • Connect the other end to an available USB port on your computer.

Wi-Fi Connection:

  • Turn on the printer and open the network settings.
  • Choose your Wi-Fi network and enter the password.
  • Follow the on-screen instructions to complete the setup.

Step 5: Load Paper

  • Open the output tray and pull out the extension bar.
  • Slide paper into the tray until it stops.
  • Adjust the paper guides to fit the paper size.

Step 6: Print a Test Page

  • On the printer control panel, press the “Setup” button.
  • Select “Tools” and then “Print Test Page.”
  • If the test page prints correctly, the printer is set up successfully.

Troubleshooting Common Issues

Printer Not Powering On:

  • Check that the power cord is plugged in properly.
  • Ensure that the power outlet is working.
  • Try resetting the printer by unplugging it for a few seconds and then plugging it back in.

Printer Not Printing:

  • Check that the ink cartridges are installed correctly.
  • Make sure there is paper loaded in the tray.
  • Check if the paper is compatible with the printer.
  • Try restarting the print job.

Printer Not Connecting to Wi-Fi:

  • Verify that the Wi-Fi network is active and accessible.
  • Ensure that the printer is within range of the Wi-Fi router.
  • Check that the Wi-Fi password is correct.
  • Reset the printer’s network settings and try connecting again.

Printer Jams:

  • Open the printer access door and carefully remove any paper that is jammed.
  • Close the access door and try printing again.

Low Ink:

  • Replace the cartridges with new ones.
  • If the ink level is low but not empty, you can still print until the cartridge is completely out.

For additional assistance, refer to the HP website or contact HP support.

Download HP OfficeJet Pro l7681 All-in-one Printer Driver

Ensure your device is fully compatible with the latest drivers for the HP OfficeJet Pro l7681 All-in-one Printer. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver