HP Pagewide Managed Color Flow MFP e77660zs – Driver Download, Setup and User Guide

Advertisement

Setting Up the HP Pagewide Managed Color Flow MFP e77660zs

Box Contents

  • HP Pagewide Managed Color Flow MFP e77660zs
  • Power cord
  • Ethernet cable (optional)
  • USB cable (optional)
  • Setup guide

Installation

1. Unpack and Place the Printer

  • Remove the printer from the box and packaging materials.
  • Place the printer in its intended location, ensuring there is sufficient clearance around it.

2. Connect the Power Cord

  • Connect one end of the power cord to the printer and the other end to a power outlet.
  • Turn on the printer by pressing the power button on the control panel.

3. Establish Network Connectivity (Optional)

Ethernet:

  • Connect an Ethernet cable from the printer’s Ethernet port to your network router.

Wi-Fi (Wireless Network):

  • On the printer’s control panel, navigate to Network > Wireless > Wireless Setup Wizard.
  • Follow the on-screen prompts to configure the printer’s wireless connection.

4. Load Paper

  • Open the paper tray and remove any protective packaging.
  • Load Letter, Legal, or A4 paper into the tray.
  • Adjust the paper guides to fit the paper size.

Setting Up the Printer Software on Your Computer

1. Install the HP Smart App

  • On your computer, visit 123.hp.com and download the HP Smart app.
  • Follow the prompts to install and open the app.

2. Add the Printer

  • If the printer is connected to your network, the app should automatically detect it.
  • If not, manually add the printer by clicking on the “Add a Printer” button.
  • Select your printer model from the list and follow the on-screen prompts to complete the setup.

Troubleshooting Common Issues

1. Printer Not Connecting to the Network

  • Check that the Ethernet cable is securely connected to both the printer and router.
  • Verify that your network router is turned on and functioning.
  • For Wi-Fi connections, ensure you are entering the correct network password.

2. Print Jobs Not Printing

  • Verify that the paper tray is loaded with paper.
  • Check that the print queue on your computer is not paused or has any pending errors.
  • Reset the printer by turning it off and back on.

3. Printer Not Responding

  • Restart the printer by unplugging it for 30 seconds and plugging it back in.
  • Perform a factory reset by pressing and holding the “Cancel” and “OK” buttons on the control panel for 5 seconds.

4. Poor Print Quality

  • Check if the toner cartridges are low and replace if necessary.
  • Clean the printheads by following the instructions in the printer’s user manual.
  • Adjust the print quality settings on your computer.

5. Error Code Messages

  • Refer to the printer’s user manual for a list of error codes and their solutions.
  • Contact HP Support if you encounter a code that is not listed in the manual.

Download HP Pagewide Managed Color Flow MFP e77660zs Driver

Ensure your device is fully compatible with the latest drivers for the HP Pagewide Managed Color Flow MFP e77660zs. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver