HP PageWide Managed Color Flow MFP E77960zts – Driver Download, Setup and User Guide

Advertisement

Detailed Guide to Setting Up the HP PageWide Managed Color Flow MFP E77960zts

Unboxing and Initial Setup

  1. Unpack the device and place it on a stable surface.
  2. Remove all protective materials and packaging.
  3. Connect the power cord to the printer and a power outlet.
  4. Turn on the printer using the power button.
  5. The printer will display a setup wizard. Follow the on-screen instructions to complete the initial setup.

Network Configuration

  1. Select “Network Configuration” from the printer’s control panel.
  2. Choose the appropriate connection method: Wired (Ethernet) or Wireless.
  3. If using wired, connect an Ethernet cable from the printer to your network router or switch.
  4. If using wireless, select your wireless network name (SSID) from the list and enter the password.

Software Installation

  1. Insert the HP driver and software disc into your computer’s optical drive.
  2. If the disc does not start automatically, navigate to the disc drive in File Explorer and run the setup program.
  3. Follow the on-screen instructions to install the HP PageWide Managed Color Flow MFP E77960zts drivers and software.
  4. Ensure that the printer is connected to the computer before completing the installation.

Paper Loading

  1. Open the printer’s front door.
  2. Remove the empty paper trays if present.
  3. Load paper into the desired trays according to the paper size and type.
  4. Adjust the paper guides to fit the width of the paper.
  5. Close the front door.

Print Quality Adjustment

  1. Print a test page from the printer’s control panel.
  2. Examine the test page for any printing issues, such as misalignment, ghosting, or streaking.
  3. If necessary, open the HP Printer Assistant software on your computer.
  4. Click on the “Printing” tab and select “Printer Toolbox”.
  5. Navigate to the “Print Quality” tab and click on “Calibrate the Printer”.
  6. Follow the on-screen instructions to calibrate the printer’s print quality.

Troubleshooting Common Issues

Issue: Printer does not turn on.

  • Ensure that the power cord is firmly connected to the printer and a power outlet.
  • Check the power outlet to confirm that it is functioning properly.

Issue: Printer not found on the network.

  • Verify that the printer is connected to the network via Ethernet or wireless.
  • Restart the printer by turning it off and on again.
  • Check the network connection status from the printer’s control panel.

Issue: Poor print quality.

  • Check the paper quality and ensure that it meets the printer’s specifications.
  • Calibrate the printer’s print quality as described in the “Print Quality Adjustment” section above.
  • Clean the print cartridges by following the instructions in the HP Printer Assistant software.

Issue: Printer not printing.

  • Check that the printer has paper loaded in the trays.
  • Verify that the print cartridges are installed correctly and have sufficient ink levels.
  • Restart the print job from your computer or mobile device.

Issue: Paper jams.

  • Open the printer’s front or rear doors and carefully remove any jammed paper.
  • Clear any debris or obstructions from the paper path.
  • Reload the paper and try printing again.

Additional Tips

  • Regularly check and clean the printer to prevent potential issues.
  • Update the printer firmware to the latest version to ensure optimal performance.
  • Use genuine HP print cartridges for consistent and reliable printing results.
  • Refer to the HP support website or contact HP customer support for additional assistance if required.

Download HP PageWide Managed Color Flow MFP E77960zts Driver

Ensure your device is fully compatible with the latest drivers for the HP PageWide Managed Color Flow MFP E77960zts. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver