HP PageWide XL 8000 Blueprinter – Driver Download, Setup and User Guide

Advertisement

Setting Up the HP PageWide XL 8000 Blueprinter

Before You Begin

  • Unpack the blueprinter and ensure all components are present.
  • Choose a suitable location for the blueprinter with adequate space and ventilation.
  • Gather the following tools: Phillips screwdriver, adjustable wrench, and cleaning cloths.

Assembly

1. Install the Ink Cartridges

  • Open the front cover of the blueprinter.
  • Locate the ink cartridge slots and insert the corresponding cartridges into their designated positions.

2. Install the Printheads

  • Lift the printhead latch and insert the printheads into the slots.
  • Close the printhead latch and secure it.

3. Connect the Power Cable

  • Connect the power cable to the blueprinter and a surge-protected outlet.

4. Connect the Ethernet Cable (Optional)

  • If desired, connect the Ethernet cable from the blueprinter to a network port.

Software Installation

  • Windows:
    • Insert the software disc into your computer’s optical drive.
    • Follow the on-screen instructions to install the software.
  • Mac:
    • Download the software package from HP’s website.
    • Double-click the downloaded file and follow the instructions to install.

Printer Configuration

1. Network Settings

  • If you connected an Ethernet cable, the blueprinter should automatically obtain an IP address.
  • Otherwise, you can manually configure network settings using the control panel.

2. Default Paper Settings

  • From the control panel, select Paper Setup > Default Paper Size.
  • Set the default paper size and type as per your requirements.

3. Calibrate the Printer

  • From the control panel, select Service > Calibration.
  • Run the calibration process to ensure optimal print quality.

Troubleshooting Common Issues

1. Printer Not Detecting Ink Cartridges

  • Ensure the ink cartridges are properly inserted and seated firmly.
  • Remove and reinsert the cartridges to make sure there are no obstructions.

2. Printheads Not Recognized

  • Check if the printheads are correctly installed and secured.
  • Remove and reinstall the printheads to fix any loose connections.

3. Connection Issues

  • If using Ethernet, ensure the cable is properly connected to both the blueprinter and network port.
  • Try a different Ethernet cable or port to rule out cable or port issues.

4. Poor Print Quality

  • Run the calibration process again to adjust printhead alignment.
  • Clean the printheads using the built-in cleaning utility.

5. Paper Jams

  • Open the paper trays and check for any stuck or torn paper.
  • Remove the jammed paper and reload the tray with new paper.

6. Software Installation Errors

  • Check your computer’s system requirements to ensure compatibility.
  • Uninstall and reinstall the software, ensuring you have administrative privileges during installation.

Additional Tips

  • Use genuine HP ink cartridges and printheads to maintain optimal performance.
  • Perform regular maintenance tasks, such as cleaning the printheads and checking for firmware updates.
  • Keep the blueprinter in a dust-free environment to prevent print quality issues.
  • Contact HP support if you encounter any difficulties or for further assistance.

Download HP PageWide XL 8000 Blueprinter Driver

Ensure your device is fully compatible with the latest drivers for the HP PageWide XL 8000 Blueprinter. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver