HP PhotoSmart 130 Printer – Driver Download, Setup and User Guide
Advertisement
Detailed Guide to Setting Up HP PhotoSmart 130 Printer
Step-by-Step Instructions for Setup
1. Unboxing and Preparation:
– Remove the printer from the box.
– Unwrap the power cord and data cable (USB or wireless).
– Place the printer on a flat and stable surface.
2. Installing Cartridges:
– Open the cartridge access door.
– Remove the protective tape from the new cartridges.
– Insert the black cartridge into the left slot and the color cartridge into the right slot.
– Close the cartridge access door.
3. Connecting to the Power Supply:
– Connect the power cord to the back of the printer and then plug it into a power outlet.
– Turn on the power switch on the front of the printer.
4. Connecting to a Computer (Wired or Wireless):
– Wired: Connect the USB cable to the back of the printer and the other end to a USB port on your computer.
– Wireless:
– Press the “Wireless” button on the printer and follow the on-screen instructions to connect to your Wi-Fi network.
– Download and install the HP Smart App on your computer.
– Follow the in-app instructions to complete the wireless setup.
5. Installing Driver Software:
– Insert the HP software CD into your computer.
– If auto-run is enabled, the installation wizard will launch automatically. Otherwise, open the CD and run the setup program.
– Follow the on-screen prompts to install the driver software.
6. Configure Printer Settings:
– Open the Control Panel (or Printer Preferences on Mac) on your computer.
– Select the “Printers and Devices” (or “Printers & Scanners”) option.
– Find your HP PhotoSmart 130 printer and right-click on it.
– Select “Printer Properties” and adjust the settings as desired (e.g., paper size, print quality).
7. Printing a Test Page:
– Click on the “Print Test Page” option in the Printer Properties window.
– The printer should print a test page to verify its functionality.
Troubleshooting Common Issues
1. Printer Not Responding:
– Check if the power cord is properly connected.
– Restart the printer by turning it off and back on.
– Check for any loose connections in the data cable.
2. Ink Smudging or Streaking:
– Clean the printheads by following the instructions in the User Manual.
– Check if the cartridges are properly installed and have enough ink.
– Try using different paper types to see if the issue persists.
3. Wireless Connection Issues:
– Make sure your computer and printer are on the same Wi-Fi network.
– Check if the wireless indicator on the printer is solid blue, indicating a successful connection.
– Reset the wireless settings on the printer by pressing and holding the “Wireless” and “Cancel” buttons simultaneously.
4. Paper Jams:
– Carefully open the paper tray and remove the jammed paper.
– Check for any obstructions or debris that may have caused the jam.
– Close the paper tray properly and try printing again.
5. Cartridge Errors:
– Ensure that the cartridges are compatible with the HP PhotoSmart 130 printer.
– Remove and reinsert the cartridges to check for proper installation.
– If the error persists, contact HP Support for assistance.
Download HP PhotoSmart 130 Printer Driver
Ensure your device is fully compatible with the latest drivers for the HP PhotoSmart 130 Printer. Downloading and installing the correct driver software is essential for optimal functionality and performance.