HP PhotoSmart 2573 All-in-one Printer – Driver Download, Setup and User Guide


Advertisement

Comprehensive Guide to Setting Up the HP Photosmart 2573 All-in-One Printer

Step 1: Unpack and Assemble the Printer

  1. Remove the printer from the box and remove all packaging materials.
  2. Place the printer on a stable, level surface.
  3. Connect the power cable to the back of the printer and to a wall outlet.

Step 2: Install the Ink Cartridges

  1. Open the ink cartridge access door.
  2. Remove any protective caps from the new ink cartridges.
  3. Insert the cartridges into their corresponding slots: black cartridge in the left slot, tricolor cartridge in the right slot.

Step 3: Load Paper

  1. Open the paper tray cover.
  2. Adjust the paper width guides to fit the paper size.
  3. Load paper into the tray with the top edge first.
  4. Close the paper tray cover.

Step 4: Install the Printer Software

  1. Insert the provided software CD into your computer’s optical drive.
  2. Follow the on-screen instructions to install the software.
  3. Connect the printer to your computer using the USB cable.

Step 5: Configure Wireless Connectivity (Optional)

  1. Make sure your computer is connected to the same Wi-Fi network as the printer will be using.
  2. Press the “Wireless” button on the printer.
  3. Follow the prompts on the printer’s display to connect to your Wi-Fi network.

Troubleshooting Common Issues

Printer Not Printing:

  • Check if the printer is turned on and connected to a power source.
  • Ensure the paper tray is loaded and the paper type matches the printer settings.
  • Run the print diagnostics tool in the printer software to diagnose any hardware issues.

Paper Jams:

  • Open the paper tray cover and remove any jammed paper.
  • Check if there are any torn or crumpled pieces of paper inside the printer.
  • Gently pull out the paper and make sure it is properly loaded into the tray.

Ink Cartridge Problems:

  • Ensure the ink cartridges are installed correctly and firmly in place.
  • Check if the ink cartridges are low or empty and replace them if necessary.
  • Clean the printhead by following the instructions in the printer software.

Wi-Fi Connectivity Issues:

  • Check if your computer and printer are connected to the same Wi-Fi network.
  • Reset the printer’s Wi-Fi settings by pressing and holding the “Wireless” button for 10 seconds.
  • Re-configure the wireless connection following the steps in Step 5 above.

Additional Tips:

  • Keep the printer driver and software up to date for optimal performance.
  • Use original HP ink cartridges for best results.
  • Regularly clean the printhead to prevent clogging.
  • Check the printer manual for additional troubleshooting steps and support resources.

Download HP PhotoSmart 2573 All-in-one Printer Driver

Ensure your device is fully compatible with the latest drivers for the HP PhotoSmart 2573 All-in-one Printer. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver