HP PhotoSmart 320 Compact Photo Printer – Driver Download, Setup and User Guide

Advertisement

Guide to Setting Up the HP PhotoSmart 320 Compact Photo Printer

Unboxing and Preparation

  1. Remove the printer from the box and remove all protective packaging.
  2. Check the contents of the box to ensure you have the printer, power cord, USB cable, ink cartridges, and user guide.
  3. Install the HP PhotoSmart 320 software on your computer by following the provided instructions.

Ink Cartridge Installation

  1. Open the printer’s top cover.
  2. Remove the ink cartridge slots by gently pressing on the tabs and pulling them out.
  3. Remove the new ink cartridges from their packaging and remove the protective tapes.
  4. Hold each ink cartridge by its sides and insert it into the correct slot, aligning it with the color indicator.
  5. Push down on the ink cartridge until it clicks into place.
  6. Close the cartridge slots and the printer cover.

Paper Loading

  1. Open the paper tray at the bottom of the printer.
  2. Adjust the paper guides to the desired paper size.
  3. Insert the paper into the tray with the printable side facing up.
  4. Adjust the paper guides to fit snugly against the paper.
  5. Close the paper tray.

Printer Setup

  1. Connect the power cord to the printer and a power outlet.
  2. Connect the USB cable to the printer and your computer.
  3. Turn on the printer by pressing the power button.
  4. The printer will initialize and go through a series of tests.
  5. Once the setup is complete, the printer is ready for use.

Troubleshooting Common Issues

Printer Not Turning On

  • Ensure the power cord is properly connected to both the printer and a power outlet.
  • Try using a different power outlet or power strip.
  • Contact HP Support if the issue persists.

Printer Not Printing

  • Check if the ink cartridges are properly installed and have ink.
  • Check if there is paper in the tray and it is correctly loaded.
  • Ensure the printer is turned on and connected to the computer.
  • Restart the printer by turning it off and on again.

Print Quality Issues

  • Clean the print nozzles by following the instructions in the user guide.
  • Use high-quality paper specifically designed for printing photos.
  • Adjust the print quality settings in the HP PhotoSmart 320 software.

Cannot Connect to the Printer

  • Verify that the USB cable is securely connected to both the printer and computer.
  • Try using a different USB cable.
  • Ensure the HP PhotoSmart 320 software is installed and running on your computer.
  • Reinstall the printer driver by following the instructions in the user guide.

Ink Smearing

  • Allow the ink to dry completely before handling printed photos.
  • Use high-quality paper that is not too porous.
  • Adjust the ink drying time in the HP PhotoSmart 320 software.

Download HP PhotoSmart 320 Compact Photo Printer Driver

Ensure your device is fully compatible with the latest drivers for the HP PhotoSmart 320 Compact Photo Printer. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver