HP PhotoSmart c5390 All-in-one Printer – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up the HP PhotoSmart c5390 All-in-One Printer

Introduction

The HP PhotoSmart c5390 is a versatile All-in-One printer designed for home and office use. It combines printing, scanning, copying, and wireless capabilities into a single unit. This guide will provide step-by-step instructions on how to set up your HP PhotoSmart c5390 printer and troubleshoot common issues.

Step 1: Unboxing and Installing

  1. Remove the printer from the box and place it on a flat, stable surface.
  2. Remove all packaging materials, including the orange tape and Styrofoam.
  3. Open the lid and remove the orange protective cover from the cartridge carriage.

Step 2: Install the Cartridges

  1. Take the new cartridges out of the plastic packaging.
  2. Lift the cartridge carriage and insert the cartridges into the corresponding slots.
  3. Close the cartridge carriage and press down on both cartridges until they click into place.

Step 3: Load Paper

  1. Open the paper tray and adjust the paper guides to the appropriate size of the paper you’re using.
  2. Load the paper into the tray, making sure it’s facing the correct direction.
  3. Close the paper tray.

Step 4: Connect the Cables

  1. Plug the power cord into the printer and a power outlet.
  2. If you’re using a USB connection, connect the USB cable to the printer and your computer.
  3. If you’re using a wireless connection, skip this step and proceed to Step 5.

Step 5: Install the Software (for USB and Windows users)

  1. Insert the HP software CD into your computer’s CD-ROM drive.
  2. Follow the on-screen instructions to install the software.
  3. Select the type of connection you’re using (USB or wireless).
  4. If you’re using a wireless connection, select your Wi-Fi network and enter the password.

Step 6: Wireless Setup (for Wi-Fi users)

  1. Press the wireless button on the printer’s control panel.
  2. Press the WPS button on your Wi-Fi router.
  3. Wait for the printer to connect to the network (indicated by a blinking light).

Troubleshooting Common Issues

Printer won’t print:

  • Check if the printer is turned on and connected properly.
  • Make sure the cartridges are correctly installed and have sufficient ink.
  • Clear any paper jams in the printer.
  • Run a printhead cleaning cycle from the printer’s control panel.

Printer not found wirelessly:

  • Check if the printer is in range of your Wi-Fi network.
  • Make sure the Wi-Fi password you entered is correct.
  • Restart both the printer and your router.
  • If possible, try connecting the printer via USB to your computer and then switch to wireless once it’s set up.

Scanner not working:

  • Make sure the scanner lid is closed properly.
  • Clean the scanner glass with a soft, lint-free cloth.
  • Check if the HP software is installed correctly and up to date.

Copy quality is poor:

  • Clean the printhead as described above.
  • Use high-quality paper for optimal results.
  • Inspect the original document for any smudges or imperfections.

Conclusion

By following the steps outlined in this guide, you should be able to successfully set up your HP PhotoSmart c5390 All-in-One Printer. If you encounter any issues, refer to the troubleshooting section for possible solutions. Enjoy the convenience and versatility of your new printer for years to come.

Download HP PhotoSmart c5390 All-in-one Printer Driver

Ensure your device is fully compatible with the latest drivers for the HP PhotoSmart c5390 All-in-one Printer. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver