HP PSC 1402 All-in-one Printer – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up the HP PSC 1402 All-in-One Printer

Introduction

The HP PSC 1402 is a compact and versatile all-in-one printer that can handle printing, scanning, and copying tasks. Setting it up correctly is crucial for optimal performance and functionality. This guide provides a detailed walkthrough of the setup process, including troubleshooting common issues.

Setup Instructions

Materials:

  • HP PSC 1402 printer
  • Power cord
  • USB cable (optional)
  • Ink cartridges (black and color)
  • Paper

Steps:

  1. Install the Ink Cartridges:

    • Open the printer’s top cover and locate the ink cartridge slots.
    • Remove the protective tape from the new cartridges and insert them into the correct slots. Ensure they snap firmly into place.

  2. Load Paper:

    • Pull out the paper tray and unfold any tabs or extensions.
    • Fan the paper to separate any sheets that may be stuck together.
    • Insert the paper into the tray and adjust the paper guides to fit the width of the paper.

  3. Connect Power:

    • Plug the power cord into the printer and a power outlet.

  4. Connect to Computer (Optional):

    • If you want to connect the printer to your computer for printing via USB, connect one end of the USB cable to the printer and the other end to a USB port on your computer.

  5. Install Software:

    • Insert the HP software CD that came with the printer into your computer’s CD drive.
    • Follow the on-screen prompts to install the printer software.

  6. Printer Alignment:

    • Once the software installation is complete, the printer will perform an alignment procedure.
    • Print the alignment page provided by the software and follow the instructions on the page to adjust the print cartridges for optimal print quality.

Troubleshooting Common Issues

Printer Not Recognized:

  • Ensure the power cord is securely connected to the printer and power outlet.
  • Try connecting the USB cable to a different USB port on your computer.
  • Uninstall and reinstall the printer software.

No Printing:

  • Check if the printer is turned on and paper is loaded.
  • Make sure the ink cartridges are properly installed and have ink.
  • Verify that the computer is connected to the printer and the printing job is sent.

Poor Print Quality:

  • Perform the printer alignment procedure again.
  • Clean the print cartridges by following the instructions in the printer’s user manual.
  • Check if the paper type and quality are suitable for the printer.

Scanner Not Working:

  • Ensure the scanner glass is clean and free of any obstructions.
  • Verify that the scanner lid is fully closed.
  • Update the printer software to the latest version.

Copy Not Working:

  • Make sure the source document is placed face up on the scanner glass.
  • Set the copy settings correctly (e.g., number of copies, paper size).
  • Check if the ink cartridges have sufficient ink.

Conclusion

By following the steps outlined in this guide, you should be able to set up your HP PSC 1402 All-in-One Printer successfully. If you encounter any issues during the process, refer to the troubleshooting tips provided. Remember to seek professional assistance if you are unable to resolve the problem on your own.

Download HP PSC 1402 All-in-one Printer Driver

Ensure your device is fully compatible with the latest drivers for the HP PSC 1402 All-in-one Printer. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver