HP PSC 1408 All-in-one Printer – Driver Download, Setup and User Guide
Advertisement
Step-by-Step Guide to Setting Up the HP PSC 1408 All-in-One Printer
Unboxing and Assembly
- Carefully open the printer box and remove all components.
- Remove the protective packaging from the printer and power cord.
- Place the printer on a stable, level surface.
- Open the input tray and load plain paper up to the indicated fill line.
Connecting to Power
- Plug the power cord into the printer and a compatible wall outlet.
- Press the power button on the front of the printer.
Connecting to a Computer (USB or Wireless)
USB Connection:
- Insert the USB cable into the USB port on the back of the printer and the other end into an available USB port on your computer.
- Install the HP software that came with the printer or download it from HP’s website.
Wireless Connection:
- On the printer’s control panel, select the “Wireless” menu.
- Choose “Setup Wizard” and follow the on-screen instructions to connect to your Wi-Fi network.
- On your computer, install the HP software and select “Wireless” during setup.
Installing Printer Drivers
- Insert the HP software disk or download the software from HP’s website.
- Follow the on-screen prompts to install the printer drivers and software.
- Once the installation is complete, test the printer by printing a test page.
Troubleshooting Common Issues
Printer Not Printing:
- Check if the printer is turned on and connected to power.
- Ensure that paper is loaded properly in the input tray.
- Check for any obstruction in the paper path.
- Restart the printer and try again.
- Reinstall the printer drivers.
Poor Print Quality:
- Replace empty or low ink cartridges.
- Run a printhead cleaning cycle through the printer’s control panel.
- Check the print settings for appropriate paper type and quality.
- Clean the printhead manually using a cotton swab dipped in isopropyl alcohol.
Scanner Not Working:
- Check if the scanner lid is closed properly.
- Disconnect and reconnect the USB cable or Wi-Fi connection.
- Restart the scanning software.
- Reinstall the HP software and scanner drivers.
Wi-Fi Connection Issues:
- Ensure that the printer is within range of your Wi-Fi router.
- Check if the Wi-Fi password is correct.
- Reset the printer’s Wi-Fi settings and reconnect.
- Update the router’s firmware if available.
Download HP PSC 1408 All-in-one Printer Driver
Ensure your device is fully compatible with the latest drivers for the HP PSC 1408 All-in-one Printer. Downloading and installing the correct driver software is essential for optimal functionality and performance.